Macro FCSpring On Surface/fr
|
|
| Description |
|---|
| Cette macro crée une hélice (ou ressort) autour d'un objet solide quelle que soit sa forme, l'hélice suit toute la surface de l'objet (Python2 est nécessaire). Version macro : 00.01 Date dernière modification : 2024/01/15 Version FreeCAD : 0.18 et après Téléchargement : Icône de la barre d'outils Auteur: Mario52 |
| Auteur |
| Mario52 |
| Téléchargement |
| Icône de la barre d'outils |
| Liens |
| Page des macros Comment installer une macro Comment créer une barre d'outils |
| Version Macro |
| 00.01 |
| Dernière modification |
| 2024/01/15 |
| Version(s) FreeCAD |
| 0.18 et après |
| Raccourci clavier |
| None |
| Voir aussi |
| Macro FCSpring Helix Variable |
Description
Cette macro crée une hélice autour d'un objet solide quelle que soit sa forme, l'hélice suit toute la surface de l'objet. (Python2 requis)
Utilisation
Sélectionnez l'objet (solide), la macro calcule les valeurs par défaut:
- La valeur de la hauteur de la BoundBox de l'objet, la valeur X du centre de la BoundBox, la valeur Y du centre de la BoundBox, et la valeur Z de la base de la BoundBox.
Configuration:
- Pas : Le pas de l'hélice (Défaut: 1)
- Height : La hauteur de l'hélice. Par défaut la hauteur est la hauteur de la boîte de délimitation de l'objet.
- Precision : Nombre de points par tour de l'objet, maximum 360 (Défaut: 36)
Coordinate Begin:
- X : La valeur X. Si l'objet est décalé, la valeur de l'axe central X de la boîte de délimitation est détectée et utilisée par défaut.
- Y : La valeur Y. Si l'objet est décalé, la valeur de l'axe central Y de la boîte de délimitation est détectée et utilisée par défaut.
- Z : La valeur Z. Le Z de la base de la BoundBox est détecté et utilisé par défaut.
Options:
- BSpline : Une hélice Bspline est créée.
- Wire : Une hélice Wire est créée.
- Points : Un point est créé dans toutes les coordonnées créées pour la construction du Bspline ou Wire
- Reverse : L'hélice est inversée (par défaut: dans le sens antihoraire)
- Si la case est cochée, vous pouvez voir la progression dans la vue 3D
Command:
- Quit : Quitte FCSpring_On_Surface.
- Ok : Lance la création.
Script
Icône de la barre d'outils
Macro_FCSpring_On_Surface.FCMacro
# -*- coding: utf-8 -*-
#from __future__ import unicode_literals
#
"""
***************************************************************************
* Copyright (c) 2019 2020 2021 2022 2023 2024 <mario52> *
* *
* This file is a supplement to the FreeCAD CAx development system. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL) *
* as published by the Free Software Foundation; either version 2 of *
* the License, or (at your option) any later version. *
* for detail see the LICENCE text file. *
** **
* Use at your own risk. The author assumes no liability for data loss. *
* It is advised to backup your data frequently. *
* If you do not trust the software do not use it. *
** **
* This software is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this macro; if not, write to the Free Software *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
* USA *
***************************************************************************
* WARNING! All changes in this file will be lost and *
* may cause malfunction of the program *
***************************************************************************
"""
#Macro_FCSpring On Surface 20/12/2019 /_00 15/01/2024
#
#OS: Windows 10 build 19045
#Word size of FreeCAD: 64-bit
#Version: 0.22.0dev.35554 (Git)
#Build type: Release
#Branch: main
#Hash: 8e2ab9f76888ac4da971f9d5069cec7bcc2b572f
#Python 3.10.13, Qt 5.15.8, Coin 4.0.2, Vtk 9.2.6, OCC 7.6.3
#Locale: French/Mars (fr_MA)
#
__title__ = "FCSpring On Surface"
__author__ = "Mario52"
__url__ = "http://www.freecadweb.org/index-fr.html"
__Wiki__ = "http://www.freecadweb.org/wiki/index.php?title=FCSpring_On_Surface"
__version__ = "00.01"
__date__ = "2024/01/15" #YYYY/MM/DD
#original code by wandererfan
#How to intersect a line with a part
#http://www.forum.freecadweb.org/viewtopic.php?f=22&t=5456
import PySide2
from PySide2 import QtGui ,QtCore, QtWidgets
from PySide2.QtGui import *
from PySide2.QtCore import *
import time
import math
from math import sqrt, pi, sin, cos, asin
import Draft, Part, FreeCADGui, FreeCAD
from FreeCAD import Base
Gui = FreeCADGui
App = FreeCAD
global ui ; ui = ""
global lineLength ; lineLength = 0.0 # longueur de la ligne
global noPass ; noPass = 1 # switch observer
global detectFace ; detectFace = 0
global sel ; sel = ""
global objet ; objet = ""
####chrono################
import time
global depart ; depart = 0.0
global arrivee; arrivee = 0.0
def chrono(sec): # 0=depart autre=stop
#time.strftime('%X %x %Z')#'15:44:07 12/14/19 Paris, Madrid'
global depart
global arrivee
if sec == 0:
depart = time.time()#time.clock()
App.Console.PrintMessage("Chrono begin : "+str(time.strftime('%X'))+"\n")
else:
arrivee = time.time()#time.clock()
App.Console.PrintMessage("Chrono end : "+str(time.strftime('%X'))+"\n")
parcouru = ((arrivee - depart)/60.0)
App.Console.PrintError("Time execution : "+str("%.3f" % parcouru)+" min"+"\n")
# FreeCADGui.updateGui()
####chrono################
class Ui_MainWindow(object):
def __init__(self ):
self.window = MainWindow
#self.path = FreeCAD.ConfigGet("AppHomePath")
#self.path = FreeCAD.ConfigGet("UserAppData")
#self.path = "your path"
# param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path
# self.path = param.GetString("MacroPath","") + "/" # macro path
# self.path = self.path.replace("\\","/")
# print("Path for the icons : " , self.path)
self.Pas = 1.0
self.Hauteur = 0.0
self.Precision = 36
self.steps = (360.0 / self.Precision)
self.longueurFil= 0.0
self.coor_X = 0.0
self.coor_Y = 0.0
self.coor_Z = 0.0
self.PointSize = 8 #heigth text
def setupUi(self, MainWindow):
self.window = MainWindow
MainWindow.setObjectName("MainWindow")
MainWindow.resize(251, 455)
# MainWindow.move(1150, 100) # position window
self.label_00_Title = QtWidgets.QLabel(MainWindow)
self.label_00_Title.setGeometry(QtCore.QRect(20, 5, 226, 16))
self.label_00_Title.setObjectName("label_00_Title")
####
self.GB_00_Configuration = QtWidgets.QGroupBox(MainWindow)
self.GB_00_Configuration.setGeometry(QtCore.QRect(15, 25, 186, 126))
self.GB_00_Configuration.setObjectName("GB_00_Configuration")
self.DS_GB_00_01_Pas = QtWidgets.QDoubleSpinBox(self.GB_00_Configuration)
self.DS_GB_00_01_Pas.setGeometry(QtCore.QRect(15, 20, 86, 22))
self.DS_GB_00_01_Pas.setObjectName("DS_GB_00_01_Pas")
self.DS_GB_00_01_Pas.setMaximum(999999)
self.DS_GB_00_01_Pas.setValue(self.Pas)
self.DS_GB_00_01_Pas.setDecimals(4)
self.DS_GB_00_01_Pas.setToolTip("The screw pitch (default = 1)")
self.DS_GB_00_01_Pas.valueChanged.connect(self.on_DS_GB_00_01_Pas)
self.Label_GB_00_01_Pas = QtWidgets.QLabel(self.GB_00_Configuration)
self.Label_GB_00_01_Pas.setGeometry(QtCore.QRect(115, 25, 66, 16))
self.Label_GB_00_01_Pas.setObjectName("Label_GB_00_01_Pas")
self.DS_GB_00_02_Hauteur = QtWidgets.QDoubleSpinBox(self.GB_00_Configuration)
self.DS_GB_00_02_Hauteur.setGeometry(QtCore.QRect(15, 55, 86, 22))
self.DS_GB_00_02_Hauteur.setObjectName("DS_GB_00_02_Hauteur")
# self.DS_GB_00_02_Hauteur.setValue()
self.DS_GB_00_02_Hauteur.setMaximum(999999)
self.DS_GB_00_02_Hauteur.setDecimals(4)
self.DS_GB_00_02_Hauteur.setToolTip("The height of the shape" + "\n"
"the default height is calculte" + "\n"
"by the max height of the BoundBox")
self.DS_GB_00_02_Hauteur.valueChanged.connect(self.on_DS_GB_00_02_Hauteur)
self.label_GB_00_02_Hauteur = QtWidgets.QLabel(self.GB_00_Configuration)
self.label_GB_00_02_Hauteur.setGeometry(QtCore.QRect(115, 60, 66, 16))
self.label_GB_00_02_Hauteur.setObjectName("label_GB_00_02_Hauteur")
self.SP_GB_00_03_Precision = QtWidgets.QSpinBox(self.GB_00_Configuration)
self.SP_GB_00_03_Precision.setGeometry(QtCore.QRect(15, 90, 86, 22))
self.SP_GB_00_03_Precision.setObjectName("DS_GB_00_03_Precision")
self.SP_GB_00_03_Precision.setValue(self.Precision)
self.SP_GB_00_03_Precision.setMaximum(360)
self.SP_GB_00_03_Precision.setMinimum(1)
self.SP_GB_00_03_Precision.setToolTip("The number of points for one turn" + "\n"
"(default = " + str(self.Precision) + ")")
self.SP_GB_00_03_Precision.valueChanged.connect(self.on_SP_GB_00_03_Precision)
self.label_GB_00_02_Precision = QtWidgets.QLabel(self.GB_00_Configuration)
self.label_GB_00_02_Precision.setGeometry(QtCore.QRect(115, 95, 66, 16))
self.label_GB_00_02_Precision.setObjectName("label_GB_00_02_Precision")
####
self.GB_01_Coordinate = QtWidgets.QGroupBox(MainWindow)
self.GB_01_Coordinate.setGeometry(QtCore.QRect(15, 160, 186, 131))
self.GB_01_Coordinate.setObjectName("GB_01_Coordinate")
self.DP_01_01_X = QtWidgets.QDoubleSpinBox(self.GB_01_Coordinate)
self.DP_01_01_X.setGeometry(QtCore.QRect(15, 25, 86, 22))
self.DP_01_01_X.setObjectName("SP_01_01_X")
self.DP_01_01_X.setMaximum(999999)
self.DP_01_01_X.setMinimum(-999999)
self.DP_01_01_X.setDecimals(4)
self.DP_01_01_X.setToolTip("The X value of the coordinate" + "\n"
"the default value is calculed" + "\n"
"by the X center BoundBox")
self.DP_01_01_X.valueChanged.connect(self.on_DP_01_01_X)
self.DP_01_02_Y = QtWidgets.QDoubleSpinBox(self.GB_01_Coordinate)
self.DP_01_02_Y.setGeometry(QtCore.QRect(15, 60, 86, 22))
self.DP_01_02_Y.setObjectName("SP_01_01_Y")
self.DP_01_02_Y.setMaximum(999999)
self.DP_01_02_Y.setMinimum(-999999)
self.DP_01_02_Y.setDecimals(4)
self.DP_01_02_Y.setToolTip("The Y value of the coordinate" + "\n"
"the default value is calculed" + "\n"
"by the Y center BoundBox")
self.DP_01_02_Y.valueChanged.connect(self.on_DP_01_02_Y)
self.DP_01_03_Z = QtWidgets.QDoubleSpinBox(self.GB_01_Coordinate)
self.DP_01_03_Z.setGeometry(QtCore.QRect(15, 95, 86, 22))
self.DP_01_03_Z.setObjectName("SP_01_01_Z")
self.DP_01_03_Z.setMaximum(999999)
self.DP_01_03_Z.setMinimum(-999999)
self.DP_01_03_Z.setDecimals(4)
self.DP_01_03_Z.setToolTip("The Z value of the coordinate" + "\n"
"the default value is calculed" + "\n"
"by the Z BoundBox minimum value")
self.DP_01_03_Z.valueChanged.connect(self.on_DP_01_03_Z)
self.Label_GB_01_01_X = QtWidgets.QLabel(self.GB_01_Coordinate)
self.Label_GB_01_01_X.setGeometry(QtCore.QRect(115, 30, 66, 13))
self.Label_GB_01_01_X.setObjectName("Label_GB_01_01_X")
self.Label_GB_01_02_Y = QtWidgets.QLabel(self.GB_01_Coordinate)
self.Label_GB_01_02_Y.setGeometry(QtCore.QRect(115, 65, 66, 13))
self.Label_GB_01_02_Y.setObjectName("Label_GB_01_02_Y")
self.Label_GB_01_03_Z = QtWidgets.QLabel(self.GB_01_Coordinate)
self.Label_GB_01_03_Z.setGeometry(QtCore.QRect(115, 100, 66, 13))
self.Label_GB_01_03_Z.setObjectName("Label_GB_01_03_Z")
####
self.GB_03_Options = QtWidgets.QGroupBox(MainWindow)
self.GB_03_Options.setGeometry(QtCore.QRect(15, 300, 186, 71))
self.GB_03_Options.setObjectName("GB_03_Options")
self.RB_03_00_BSpline = QtWidgets.QRadioButton(self.GB_03_Options)
self.RB_03_00_BSpline.setGeometry(QtCore.QRect(10, 20, 71, 18))
self.RB_03_00_BSpline.setChecked(True)
self.RB_03_00_BSpline.setToolTip("BSpline")
self.RB_03_00_BSpline.setObjectName("RB_03_00_BSpline")
self.RB_03_01_Wire = QtWidgets.QRadioButton(self.GB_03_Options)
self.RB_03_01_Wire.setGeometry(QtCore.QRect(100, 20, 71, 18))
self.RB_03_01_Wire.setToolTip("Wire")
self.RB_03_01_Wire.setObjectName("RB_03_01_Wire")
self.CB_03_00_Points = QtWidgets.QCheckBox(self.GB_03_Options)
self.CB_03_00_Points.setGeometry(QtCore.QRect(10, 45, 71, 18))
self.CB_03_00_Points.setToolTip("Create one Points in all coordinates")
self.CB_03_00_Points.setObjectName("CB_03_00_Points")
self.CB_03_01_Reverse = QtWidgets.QCheckBox(self.GB_03_Options)
self.CB_03_01_Reverse.setGeometry(QtCore.QRect(100, 45, 71, 18))
self.CB_03_01_Reverse.setToolTip("Reverse the direction" + "\n"
"Default = counter clockwise")
self.CB_03_01_Reverse.setObjectName("CB_03_01_Reverse")
self.CB_03_02_Update = QtWidgets.QCheckBox(self.GB_03_Options)
self.CB_03_02_Update.setGeometry(QtCore.QRect(170, 45, 18, 18))
self.CB_03_02_Update.setObjectName("CB_03_02_Update")
self.CB_03_02_Update.setToolTip("Display the progress of the operation in the 3D view")
####
self.GB_02_Command = QtWidgets.QGroupBox(MainWindow)
self.GB_02_Command.setGeometry(QtCore.QRect(15, 380, 186, 61))
self.GB_02_Command.setObjectName("GB_02_Command")
self.PB_02_01_Ok = QtWidgets.QPushButton(self.GB_02_Command)
self.PB_02_01_Ok.setGeometry(QtCore.QRect(100, 25, 75, 23))
self.PB_02_01_Ok.setObjectName("GB_02_01_Ok")
self.PB_02_01_Ok.setToolTip("Button Ok" + "\n"
"If on error is created" + "\n"
"the button is coloured in red" + "\n"
"if not the button is coloured in green")
self.PB_02_01_Ok.clicked.connect(self.on_PB_02_01_Ok)
self.PB_02_02_Quit = QtWidgets.QPushButton(self.GB_02_Command)
self.PB_02_02_Quit.setGeometry(QtCore.QRect(10, 25, 75, 23))
self.PB_02_02_Quit.setObjectName("GB_02_01_Quit")
self.PB_02_02_Quit.setToolTip("Quit FCSpring On Surface")
self.PB_02_02_Quit.clicked.connect(self.on_PB_Quit_clicked)
# section progressBar 1 Green
self.progressBar_1_Green = QtWidgets.QProgressBar(MainWindow)
self.progressBar_1_Green.setGeometry(QtCore.QRect(210, 30, 30, 411))
self.progressBar_1_Green.setValue(0)
self.progressBar_1_Green.setOrientation(QtCore.Qt.Vertical)
self.progressBar_1_Green.setAlignment(QtCore.Qt.AlignCenter)
self.progressBar_1_Green.setObjectName("progressBar_1_Green")
self.progressBar_1_Green.setToolTip("If the coordinate is erroneous the progressBar is coloured in red")
self.progressBar_1_Green.setStyleSheet("QProgressBar {color:black; }"
"QProgressBar:chunk {background-color: #00FF00;}") # modify the progressBar color
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
MainWindow.setWindowFlags(PySide2.QtCore.Qt.WindowStaysOnTopHint) # PySide2 cette fonction met la fenetre en avant
def retranslateUi(self, MainWindow):
MainWindow.setWindowTitle(__title__+" ("+__version__+", "+__date__+")")
self.label_00_Title.setText(__title__+" ("+__version__+", "+__date__+")")
self.GB_00_Configuration.setTitle("Configuration")
self.Label_GB_00_01_Pas.setText("Pas")
self.label_GB_00_02_Hauteur.setText("Heigth")
self.label_GB_00_02_Precision.setText("Precision")
self.GB_01_Coordinate.setTitle("Coordinate Begin")
self.Label_GB_01_01_X.setText("X")
self.Label_GB_01_02_Y.setText("Y")
self.Label_GB_01_03_Z.setText("Z")
self.GB_03_Options.setTitle("Options")
self.RB_03_00_BSpline.setText("BSpline")
self.RB_03_01_Wire.setText("Wire")
self.CB_03_00_Points.setText("Points")
self.CB_03_01_Reverse.setText("Reverse")
self.GB_02_Command.setTitle("Options")
self.GB_02_Command.setTitle("Command")
self.PB_02_01_Ok.setText("Ok")
self.PB_02_02_Quit.setText("Quit")
def on_DS_GB_00_01_Pas(self, value):
self.Pas = value
self.DS_GB_00_01_Pas.setStyleSheet("QDoubleSpinBox {background-color: QPalette.Base}")
def on_DS_GB_00_02_Hauteur(self, value):
self.Hauteur = value
self.DS_GB_00_02_Hauteur.setStyleSheet("QDoubleSpinBox {background-color: QPalette.Base}")
def on_SP_GB_00_03_Precision(self, value):
self.Precision = value
self.steps = (360.0 / self.Precision)
self.SP_GB_00_03_Precision.setStyleSheet("QSpinBox {background-color: QPalette.Base}")
def on_DP_01_01_X(self, value):
self.coor_X = value
def on_DP_01_02_Y(self, value):
self.coor_Y = value
def on_DP_01_03_Z(self, value):
self.coor_Z = value
def on_PB_02_01_Ok(self):
global lineLength
global noPass
global sel
global depart
global arrivee
global detectFace
global objet
try:
if (self.Pas != 0) and (self.Hauteur != 0) and (self.Precision != 0) and (detectFace == 1):
chrono(0)
noPass = 0 # switch 0=nopass
#sel = FreeCADGui.Selection.getSelection()
objetName = sel[0].Name
objetLabel = sel[0].Label
objet = sel[0].Shape
z = 0.0
compteur = 0
lineDirectrice = Draft.makeWire([FreeCAD.Vector(0.0, 0.0, 0.0),FreeCAD.Vector(lineLength , 0.0, 0.0)])
#print(lineDirectrice.Name)
if self.CB_03_02_Update.isChecked():
FreeCADGui.ActiveDocument.getObject(lineDirectrice.Name).Visibility = True
else:
FreeCADGui.ActiveDocument.getObject(lineDirectrice.Name).Visibility = False
App.ActiveDocument.recompute()
pl=FreeCAD.Placement()
points = []
self.progressBar_1_Green.setValue(0)
progressMax = (self.Precision * int(self.Hauteur / self.Pas) + 1)
self.progressBar_1_Green.setMaximum(progressMax)
for sp in range(int(self.Hauteur / self.Pas) + 1): #nombre de tours
for i in range(0, (360*1000), int(self.steps*1000)): #
if self.CB_03_01_Reverse.isChecked():
i = -float(i/1000) ##Reverse
else:
i = float(i/1000) ##Normal
compteur += 1
pl=App.Placement(App.Vector(self.coor_X, self.coor_Y, z + self.coor_Z), App.Rotation(i,0.0,0.0), App.Vector(0,0,0))
lineDirectrice.Placement = pl
z += (self.Pas / self.Precision)
if z > self.Hauteur:
break
line = lineDirectrice.Shape
intersection = objet.common(line) # only for solid object not for face
try:
coorIntersec = intersection.Vertexes[1].Point
points += [FreeCAD.Vector(coorIntersec[0],coorIntersec[1],coorIntersec[2])]
if self.CB_03_00_Points.isChecked():
Draft.makePoint(coorIntersec[0],coorIntersec[1],coorIntersec[2])
except Exception:
self.progressBar_1_Green.setStyleSheet("QProgressBar {color:black; }"
"QProgressBar:chunk {background-color: #FF0000;}") # modify the progressBar color
self.progressBar_1_Green.setValue(progressMax)
####progressBar
self.progressBar_1_Green.setStyleSheet("QProgressBar {color:black; }"
"QProgressBar:chunk {background-color: green;}") # modify the progressBar color
self.progressBar_1_Green.setValue(compteur)
####progressBar
if self.CB_03_02_Update.isChecked():
Gui.updateGui()
App.ActiveDocument.recompute()
try:
App.ActiveDocument.removeObject(lineDirectrice.Name)
except Exception:
None
if len(points) != 0:
##Bspline
if self.RB_03_00_BSpline.isChecked():
BSpline = Draft.makeBSpline(points,closed=False)
#BSpline.Label = objetLabel + "_BSpline"
App.ActiveDocument.ActiveObject.Label = objetLabel + "_BSpline"
#self.longueurFil =
##Wire
if self.RB_03_01_Wire.isChecked():
Wire = Draft.makeWire(points,closed=False)
#Wire.Label = objetLabel + "_Wire"
App.ActiveDocument.ActiveObject.Label = objetLabel + "_Wire"
#self.longueurFil =
self.PB_02_01_Ok.setStyleSheet("QPushButton {background-color: green;\n"
"border:2px solid rgb( 0, 115,0);}")
else:
self.PB_02_01_Ok.setText("K-O")
self.PB_02_01_Ok.setStyleSheet("QPushButton {background-color: red;\n"
"border:2px solid rgb(115, 0, 0);}")
else:
self.PB_02_01_Ok.setStyleSheet("QPushButton {background-color: red;\n"
"border:2px solid rgb(115, 0, 0);}")
if (self.Pas == 0):
self.DS_GB_00_01_Pas.setStyleSheet("QDoubleSpinBox {border:2px solid rgb(115, 0, 0);}")
if (self.Hauteur == 0):
self.DS_GB_00_02_Hauteur.setStyleSheet("QDoubleSpinBox {border:2px solid rgb(115, 0, 0);}")
if (self.Precision == 0):
self.SP_GB_00_03_Precision.setStyleSheet("QSpinBox {border:2px solid rgb(115, 0, 0);}")
FreeCAD.Console.PrintMessage("Pas : " + str(self.Pas) + "\n")
FreeCAD.Console.PrintMessage("Hauteur : " + str(self.Hauteur) + "\n")
FreeCAD.Console.PrintMessage("Precision : " + str(self.Precision) + "\n")
FreeCAD.Console.PrintMessage("Coordinate : " + str(len(points)) + "\n")
#FreeCAD.Console.PrintMessage("Length : " + str(self.longueurFil) + "\n")
FreeCAD.Console.PrintMessage("coor_X : " + str(self.coor_X) + "\n")
FreeCAD.Console.PrintMessage("coor_Y : " + str(self.coor_Y) + "\n")
FreeCAD.Console.PrintMessage("coor_Z : " + str(self.coor_Z) + "\n")
chrono(1)
FreeCAD.Console.PrintMessage("______________________" + "\n")
points = []
except Exception:
self.PB_02_01_Ok.setStyleSheet("QSpinBox {background-color: red;\n"
"border:2px solid rgb(115, 0, 0);}")
App.ActiveDocument.recompute()
noPass = 1 # switch 1 = pass
####################################################################
def on_PB_Quit_clicked(self):
FreeCADGui.Selection.removeObserver(s) # Uninstalls resident function (desactivated for read after LeftDock RightDock)
self.window.hide() # hide the window and close the macro
FreeCAD.Console.PrintMessage("Quit " + __title__ + "\n\n")
##############################################################################
class SelObserver:
def addSelection(self,document, object, element, position): # Selection
global ui
global lineLength
global noPass
global sel
global detectFace
global objet
sel = ""
ui.progressBar_1_Green.setValue(0)
ui.PB_02_01_Ok.setStyleSheet("QPushButton {background-color: QPalette.Base}") # origin system
ui.PB_02_01_Ok.setText("Ok")
ui.DS_GB_00_01_Pas.setStyleSheet("QDoubleSpinBox {background-color: QPalette.Base}")
ui.DS_GB_00_02_Hauteur.setStyleSheet("QDoubleSpinBox {background-color: QPalette.Base}")
ui.SP_GB_00_03_Precision.setStyleSheet("QSpinBox {background-color: QPalette.Base}")
ui.Label_GB_01_01_X.setText("X")
ui.Label_GB_01_02_Y.setText("Y")
ui.Label_GB_01_03_Z.setText("Z")
detectFace = 0
if (noPass == 1):
try:
selEx = FreeCADGui.Selection.getSelectionEx()
if (noPass == 1) and (hasattr(selEx[0].SubObjects[0],"Surface")):
detectFace = 1
ui.DP_01_01_X.setValue(0.0)
ui.DP_01_02_Y.setValue(0.0)
ui.DP_01_03_Z.setValue(0.0)
sel = FreeCADGui.Selection.getSelection()
boundBoxLZ = sel[0].Shape.BoundBox.ZLength # Length z boundBox rectangle
####
boundBoxLL = sel[0].Shape.BoundBox.DiagonalLength # Length Diagonal rectangle
####
boundBoxZMin = sel[0].Shape.BoundBox.ZMin # coordonate ZMin
ui.Label_GB_01_03_Z.setText("Z ("+str(round(boundBoxZMin,4))+")")
####
boundBoxCenter = sel[0].Shape.BoundBox.Center # boundBox Center
####
ui.Label_GB_01_01_X.setText("X BBCenter")
ui.Label_GB_01_02_Y.setText("Y BBCenter")
ui.Label_GB_01_03_Z.setText("Z Lowermost")
ui.DP_01_01_X.setValue(boundBoxCenter[0]) # BBcenter X
ui.DP_01_02_Y.setValue(boundBoxCenter[1]) # BBcenter Y
ui.DP_01_03_Z.setValue(boundBoxZMin) # point le plus bas
self.Hauteur = boundBoxLZ
ui.DS_GB_00_02_Hauteur.setValue(self.Hauteur)
lineLength = boundBoxLL
except Exception:
None
##############################################################################
s=SelObserver()
FreeCADGui.Selection.addObserver(s) # install the function resident mode
MainWindow = QtWidgets.QWidget() #PySide2
ui = Ui_MainWindow()
ui.setupUi(MainWindow)
MainWindow.show()
Exemples
Liens
La genèse Zwei Helix - ein Sweep
Le code original How to intersect a line with a part par wandererfan
Version
00.01 2024/01/15 : adaptation styleSheet pour le nouveau Qt
00.00 20/12/2019 : Départ