Reinforcement BillOfMaterial/it

Other languages:

Armatura

Sagomatura dei ferri

Reinforcement

Posizione nel menu
Distinta dei ferri
Reinforcement → Distinta dei ferri
Ambiente
Arch, BIM
Avvio veloce
Nessuno
Introdotto nella versione
0.19
Vedere anche
Bar Bending Schedule, Quotare l'armatura
Contents 1 Descrizione 2 Utilizzo 3 Properties 4 Scripting 4.1 Create Bill Of Material Spreadsheet 4.1.1 Example 4.2 Create Bill Of Material SVG 4.2.1 Example

Descrizione

Lo strumento Distinta dei ferri (BOM) consente all'utente di creare una distinta delle barre di rinforzo.

Questo comando fa parte dell'ambiente Reinforcement, un ambiente esterno che si può installare con Addon manager, tramite il menu Strumenti → Addon manager → Reinforcement.

Distinta di barre di rinforzo

Utilizzo

1. Select Arch Rebar and Rebar2 objects you want to include in the Bill Of Material. Or select Arch Structure objects to include Arch Rebar objects hosted by those into Bill Of Material. If nothing is selected, then Bill Of Material will be generated for all Arch Rebar and Rebar2 objects present in the model.

2. Then select Rebar Bill Of Material from the rebar tools.

3. A dialog box will pop-out on the screen as shown below.

Dialog Box for the Arch Rebar BOM tool

4. Modify data to suit your requirements.

5. To edit Rebar Bill Of Material SVG configurations, click on Edit SVG Configurations. A dialog box will pop-out as shown below.

Dialog Box for the Arch Rebar BOM SVG configuration editing

6. Modify Rebar Bill Of Material SVG configurations and then click on OK to apply changes.

7. Click OK or Apply to generate Bill Of Material for rebars.

8. Click Cancel to exit the dialog box.

Properties

General:

DatiColumn Headers: A dictionary with column_data as key and tuple (column_display_header, column_sequence) as value.
DatiColumn Units: A dictionary with keys: "Diameter", "RebarLength", "RebarsTotalLength" and their corresponding units as value.
DatiDiameter Weight Map: A dictionary with the diameter as key and corresponding weight as value.
DatiRebar Length Type: Rebar Length Type specifies the type of rebar length used for BOM calculations i.e. "RealLength" or "LengthWithSharpEdges".
DatiRebar Objects: A list of ArchRebar and/or rebar2 and/or structures (to select ArchRebar in that structure) objects.

SVG:

DatiFont Family: Font Family of text in BOM SVG.
DatiFont Filename: Font filename corresponding to font-family required in console mode.
DatiFont Size: Font size in mm.
DatiColumn Width: Width of each column in the BOM SVG table.
DatiRow Height: Height of each row in the BOM SVG table.
DatiLeft Offset: Left offset of BOM SVG table.
DatiTop Offset: Top offset of BOM SVG table.
DatiMinimum Right Offset: Minimum right offset of BOM SVG table.
DatiMinimum Bottom Offset: Minimum bottom offset of the BOM SVG table.
DatiMaximum Width: Maximum width of the BOM SVG table.
DatiMaximum Height: Maximum height of the BOM SVG table.
DatiTemplate File: Template SVG file for BOM SVG.
DatiOutput File: BOM SVG Output file.

Scripting

The Reinforcement BillOfMaterial tool can be used in macros and from the Python console by using the following function:

Create Bill Of Material Spreadsheet

bom_spreadsheet = makeBillOfMaterial(
    column_headers=None,
    column_units=None,
    dia_weight_map=None,
    rebar_length_type=None,
    rebar_objects=None,
    obj_name="RebarBillOfMaterial",
)

Creates a RebarBillOfMaterial spreadsheet object for given rebar_objects.
- If rebar_objects list is empty, then RebarBillOfMaterial spreadsheet will be created for all rebars in a model.
column_headers is a dictionary with keys: "Host", "Mark", "RebarsCount", "Diameter", "RebarLength", "RebarsTotalLength" and values are tuple of column_header and their sequence number.

   Example: {
                "Host": ("Member", 1),
                "Mark": ("Mark", 2),
                "RebarsCount": ("No. of Rebars", 3),
                "Diameter": ("Diameter in mm", 4),
                "RebarLength": ("Length in m/piece", 5),
                "RebarsTotalLength": ("Total Length in m", 6),
            }
            set column sequence number to 0 to hide column.

column_units is a dictionary with keys: "Diameter", "RebarLength", "RebarsTotalLength" and their corresponding units as value.

   Example: {
                "Diameter": "mm",
                "RebarLength": "m",
                "RebarsTotalLength": "m",
            }

dia_weight_map is a dictionary with diameter as key and corresponding weight as value.

   Syntax: {
                6: FreeCAD.Units.Quantity("0.222 kg/m"),
                8: FreeCAD.Units.Quantity("0.395 kg/m"),
                10: FreeCAD.Units.Quantity("0.617 kg/m"),
                12: FreeCAD.Units.Quantity("0.888 kg/m"),
                ...,
            }

rebar_length_type specifies the type of rebar length used for BOM calculations; it can be "RealLength" or "LengthWithSharpEdges".
rebar_objects is a list of ArchRebar and/or rebar2 and/or structures (to select ArchRebar in that structure) objects.

Example

import FreeCAD, Draft, Arch
from ColumnReinforcement import TwoTiesSixRebars
from BillOfMaterial import BillOfMaterial_Spreadsheet

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure1 = Arch.makeStructure(Rect, height=1600)
Structure1.ViewObject.Transparency = 80
Structure2 = Arch.makeStructure(Rect, height=1600)
Structure2.ViewObject.Transparency = 80
Structure2.Placement = FreeCAD.Placement(FreeCAD.Vector(1000, 0, 0), FreeCAD.Rotation(FreeCAD.Vector(0, 0, 1), 0))
FreeCAD.ActiveDocument.recompute()

# Create Straight Rebars
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=40,
    b_offset_of_rebars=40,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure1,
    facename="Face6",
)

# Create LShaped Rebars with hook along x-axis
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="x-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure2,
    facename="Face6",
)

COLUMN_UNITS = {
    "Diameter": "mm",
    "RebarLength": "m",
    "RebarsTotalLength": "m",
}

COLUMN_HEADERS = {
    "Host": ("Member", 1),
    "Mark": ("Mark", 2),
    "RebarsCount": ("No. of Rebars", 3),
    "Diameter": ("Diameter in " + COLUMN_UNITS["Diameter"], 4),
    "RebarLength": ("Length in " + COLUMN_UNITS["RebarLength"] + "/piece", 5),
    "RebarsTotalLength": ("Total Length in " + COLUMN_UNITS["RebarsTotalLength"], 6),
}

DIA_WEIGHT_MAP = {
    6: FreeCAD.Units.Quantity("0.222 kg/m"),
    8: FreeCAD.Units.Quantity("0.395 kg/m"),
    10: FreeCAD.Units.Quantity("0.617 kg/m"),
    12: FreeCAD.Units.Quantity("0.888 kg/m"),
    14: FreeCAD.Units.Quantity("1.206 kg/m"),
    16: FreeCAD.Units.Quantity("1.578 kg/m"),
    18: FreeCAD.Units.Quantity("2.000 kg/m"),
    20: FreeCAD.Units.Quantity("2.466 kg/m"),
    22: FreeCAD.Units.Quantity("2.980 kg/m"),
    25: FreeCAD.Units.Quantity("3.854 kg/m"),
    28: FreeCAD.Units.Quantity("4.830 kg/m"),
    32: FreeCAD.Units.Quantity("6.313 kg/m"),
    36: FreeCAD.Units.Quantity("7.990 kg/m"),
    40: FreeCAD.Units.Quantity("9.864 kg/m"),
    45: FreeCAD.Units.Quantity("12.490 kg/m"),
    50: FreeCAD.Units.Quantity("15.410 kg/m"),
}

# To create Bill Of Material Spreadsheet for all rebars in a model
BillOfMaterial_Spreadsheet.makeBillOfMaterial(
    column_headers=COLUMN_HEADERS,
    column_units=COLUMN_UNITS,
    dia_weight_map=DIA_WEIGHT_MAP,
    rebar_length_type="RealLength",
)

# To create Bill Of Material Spreadsheet for rebars in Structure1
BillOfMaterial_Spreadsheet.makeBillOfMaterial(
    column_headers=COLUMN_HEADERS,
    column_units=COLUMN_UNITS,
    dia_weight_map=DIA_WEIGHT_MAP,
    rebar_length_type="LengthWithSharpEdges",
    rebar_objects=[Structure1],
)

Create Bill Of Material SVG

makeBillOfMaterialSVG(
    column_headers: Optional[Dict[str, Tuple[str, int]]] = None,
    column_units: Optional[Dict[str, str]] = None,
    dia_weight_map: Optional[Dict[float, FreeCAD.Units.Quantity]] = None,
    rebar_length_type: Optional[
        Literal["RealLength", "LengthWithSharpEdges"]
    ] = None,
    font_family: Optional[str] = None,
    font_filename: Optional[str] = None,
    font_size: Optional[float] = None,
    column_width: Optional[float] = None,
    row_height: Optional[float] = None,
    bom_left_offset: Optional[float] = None,
    bom_top_offset: Optional[float] = None,
    bom_min_right_offset: Optional[float] = None,
    bom_min_bottom_offset: Optional[float] = None,
    bom_table_svg_max_width: Optional[float] = None,
    bom_table_svg_max_height: Optional[float] = None,
    template_file: Optional[str] = None,
    output_file: Optional[str] = None,
    rebar_objects: Optional[List] = None,
    reinforcement_group_by: Optional[Literal["Mark", "Host"]] = None,
    return_svg_only: bool = False,
) -> BOMContent

Creates and return a RebarBillOfMaterial_SVG BOMContent object for given rebar_objects.
- If rebar_objects list is empty, then BOMContent object will be created for all rebars in a model.
column_headers is a dictionary with keys: "Host", "Mark", "RebarsCount", "Diameter", "RebarLength", "RebarsTotalLength" and values are tuple of column_header and their sequence number.

   Example: {
                "Host": ("Member", 1),
                "Mark": ("Mark", 2),
                "RebarsCount": ("No. of Rebars", 3),
                "Diameter": ("Diameter in mm", 4),
                "RebarLength": ("Length in m/piece", 5),
                "RebarsTotalLength": ("Total Length in m", 6),
            }
            set column sequence number to 0 to hide column.

column_units is a dictionary with keys: "Diameter", "RebarLength", "RebarsTotalLength" and their corresponding units as value.

   Example: {
                "Diameter": "mm",
                "RebarLength": "m",
                "RebarsTotalLength": "m",
            }

dia_weight_map is a dictionary with diameter as key and corresponding weight as value.

   Syntax: {
                6: FreeCAD.Units.Quantity("0.222 kg/m"),
                8: FreeCAD.Units.Quantity("0.395 kg/m"),
                10: FreeCAD.Units.Quantity("0.617 kg/m"),
                12: FreeCAD.Units.Quantity("0.888 kg/m"),
                ...,
            }

rebar_length_type specifies the type of rebar length used for the bill of material calculations; it can be "RealLength" or "LengthWithSharpEdges".
font_family specifies the font family of data text.
font_filename specifies font filename or full path of the font file corresponding to font_family. This is required if you are working in pure console mode, without any GUI.
font_size specifies the font size of the data text.
column_width specifies the width of each column in the bill of material table SVG.
row_height specifies the height of each row in the bill of material table SVG.
bom_left_offset specifies the left offset of the bill of material SVG on template_file.
bom_top_offset specifies the top offset of the bill of material SVG on template_file.
bom_min_right_offset specifies the minimum right offset of the bill of material SVG on template_file.
bom_min_bottom_offset specifies the minimum bottom offset of the bill of material SVG on template_file
bom_table_svg_max_width specifies the maximum width of the bill of material table in SVG.
bom_table_svg_max_height specifies the maximum height of the bill of material table in SVG.
template_file specifies the template file used to place the generated bill of material table on it. It must be a valid TechDraw template file as here.
output_file specifies the output file to write generated bill of material SVG.
rebar_objects is a list of ArchRebar and/or rebar2 and/or structures (to select ArchRebar in that structure) objects.
reinforcement_group_by specifies how reinforcement objects should be grouped; it can be "Mark" or "Host".
return_svg_only specifies if the BOMContent object is to be created or not. If return_svg_only is True, then neither BOMContent object is created nor SVG is written to output_file. And it returns the SVG element.

Example

from pathlib import Path
import FreeCAD, Draft, Arch
from ColumnReinforcement import TwoTiesSixRebars
from BillOfMaterial import BillOfMaterial_SVG

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure1 = Arch.makeStructure(Rect, height=1600)
Structure1.ViewObject.Transparency = 80
Structure2 = Arch.makeStructure(Rect, height=1600)
Structure2.ViewObject.Transparency = 80
Structure2.Placement = FreeCAD.Placement(FreeCAD.Vector(1000, 0, 0), FreeCAD.Rotation(FreeCAD.Vector(0, 0, 1), 0))
FreeCAD.ActiveDocument.recompute()

# Create Straight Rebars
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,        
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=40,
    b_offset_of_rebars=40,
    main_rebars_type="StraightRebar",
    hook_orientation="Top Inside",
    hook_extend_along="x-axis",
    l_rebar_rounding=None,
    hook_extension=None,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure1,
    facename="Face6",
)

# Create LShaped Rebars with hook along x-axis
RebarGroup = TwoTiesSixRebars.makeTwoTiesSixRebars(
    l_cover_of_ties=40,
    r_cover_of_ties=40,
    t_cover_of_ties=40,
    b_cover_of_ties=40,
    offset_of_ties=100,
    bent_angle_of_ties=135,
    extension_factor_of_ties=2,
    dia_of_ties=8,
    number_spacing_check=True,
    number_spacing_value=10,
    dia_of_main_rebars=16,
    t_offset_of_rebars=-40,
    b_offset_of_rebars=-40,
    main_rebars_type="LShapeRebar",
    hook_orientation="Top Outside",
    hook_extend_along="x-axis",
    l_rebar_rounding=2,
    hook_extension=40,
    ties_sequence=("Tie1", "Tie2"),
    structure=Structure2,
    facename="Face6",
)

COLUMN_UNITS = {
    "Diameter": "mm",
    "RebarLength": "m",
    "RebarsTotalLength": "m",
}

COLUMN_HEADERS = {
    "Host": ("Member", 1),
    "Mark": ("Mark", 2),
    "RebarsCount": ("No. of Rebars", 3),
    "Diameter": ("Diameter in " + COLUMN_UNITS["Diameter"], 4),
    "RebarLength": ("Length in " + COLUMN_UNITS["RebarLength"] + "/piece", 5),
    "RebarsTotalLength": ("Total Length in " + COLUMN_UNITS["RebarsTotalLength"], 6),
}

DIA_WEIGHT_MAP = {
    6: FreeCAD.Units.Quantity("0.222 kg/m"),
    8: FreeCAD.Units.Quantity("0.395 kg/m"),
    10: FreeCAD.Units.Quantity("0.617 kg/m"),
    12: FreeCAD.Units.Quantity("0.888 kg/m"),
    14: FreeCAD.Units.Quantity("1.206 kg/m"),
    16: FreeCAD.Units.Quantity("1.578 kg/m"),
    18: FreeCAD.Units.Quantity("2.000 kg/m"),
    20: FreeCAD.Units.Quantity("2.466 kg/m"),
    22: FreeCAD.Units.Quantity("2.980 kg/m"),
    25: FreeCAD.Units.Quantity("3.854 kg/m"),
    28: FreeCAD.Units.Quantity("4.830 kg/m"),
    32: FreeCAD.Units.Quantity("6.313 kg/m"),
    36: FreeCAD.Units.Quantity("7.990 kg/m"),
    40: FreeCAD.Units.Quantity("9.864 kg/m"),
    45: FreeCAD.Units.Quantity("12.490 kg/m"),
    50: FreeCAD.Units.Quantity("15.410 kg/m"),
}

# To create Bill Of Material SVG for all rebars in a model
BillOfMaterial_SVG.makeBillOfMaterialSVG(
    column_headers=COLUMN_HEADERS,
    column_units=COLUMN_UNITS,
    dia_weight_map=DIA_WEIGHT_MAP,
    rebar_length_type="RealLength",
    font_family = "DejaVu Sans",
    font_filename = "DejaVuSans.ttf",
    font_size = 3,
    column_width = 30,
    row_height = 10,
    bom_left_offset = 6,
    bom_top_offset = 40,
    bom_min_right_offset = 6,
    bom_min_bottom_offset = 6,
    bom_table_svg_max_width = 0,
    bom_table_svg_max_height = 0,
    template_file = str(Path(BillOfMaterial_SVG.__file__).parent.absolute() / "BOMTemplate.svg"),
    output_file = None,
    reinforcement_group_by = "Host",
)

# To create Bill Of Material SVG for rebars in Structure1
BillOfMaterial_SVG.makeBillOfMaterialSVG(
    column_headers = COLUMN_HEADERS,
    column_units = COLUMN_UNITS,
    dia_weight_map = DIA_WEIGHT_MAP,
    rebar_length_type = "LengthWithSharpEdges",
    font_family = "DejaVu Sans",
    font_filename = "DejaVuSans.ttf",
    font_size = 3,
    column_width = 30,
    row_height = 10,
    bom_left_offset = 6,
    bom_top_offset = 40,
    bom_min_right_offset = 6,
    bom_min_bottom_offset = 6,
    bom_table_svg_max_width = 0,
    bom_table_svg_max_height = 0,
    template_file = str(Path(BillOfMaterial_SVG.__file__).parent.absolute() / "BOMTemplate.svg"),
    rebar_objects=[Structure1],
    reinforcement_group_by = "Host",
)

Armatura

Sagomatura dei ferri

Reinforcement