PartDesign Draft/ro

Other languages:

Chamfer

Thickness

PartDesign

Menu location
PartDesign Draft
Part Design → Draft
Workbenches
Part Design
Default shortcut
None
Introduced in version
-
See also
None
Contents 1 Description 1.1 Descriere 2 Usage 2.1 Add a draft 2.2 Utilizare 2.3 Parametrii și Opțiuni 2.3.1 Adaugă o Fațetă / Șterge o Fațetă 2.3.2 Draft Angle 2.3.3 Plan Neutru 2.3.4 Pull Direction 2.3.5 Reverse Pull Direction 2.4 Cazuri speciale 2.5 Edit a draft 3 Options 4 Notes 5 Properties 5.1 Data

Description

Descriere

Acest instrument creează o pantă unghiulară (înclinarea fațetelor) pe fațetele selectate ale unui obiect. Un nou proiect de intrare separat (urmat de un număr secvențial dacă există deja proiecte existente anterior în document) este creat în arborescența proiectului.

Select one or more faces of the object before starting the tool. Here, 2 faces have been selected.

2 faces have been added, and a 10 deg. draft applied. The bottom plane has remained dimensionally stable, while the draft has made the top plane smaller.

The Neutral Plane has been changed to the top. Now, the top plane has stayed dimensionally stable, while the draft has made the bottom plane larger.

Pull direction is set to the lower right edge, resulting in the draft pulling to the left.

Checking the Reverse Direction box has applied an inward draft rather than outward.

Usage

Add a draft

Select one or more faces on the object before starting the tool. Here, 2 faces have been selected.

The Neutral Plane has been changed to the Top Surface. Now, the top plane has stayed dimensionally stable, while the draft has made the bottom plane larger.

Utilizare

Faceți clic pe obiect sau faceți clic pe meniu sau faceți clic pe meniu.
În Draft Parameters în TaskPanel, setați parametrii și / sau opțiunile necesare conform descrierii de mai jos.
Click OK pentru a valida.
Arborele proiectului a fost validat sau ați făcut dublu clic pe arborescența Proiect sau faceți clic dreapta pe el și selectațiEdit Draft.

Parametrii și Opțiuni

Adaugă o Fațetă / Șterge o Fațetă

Faceți clic pe Adăugare fațetă sau Eliminare fațetă, apoi selectați o singură fațetă pentru a actualiza lista fațetelor active. Repetați după cum este necesar.

Draft Angle

Set the Draft Angle by entering a value or by clicking on the up/down arrows. The applied draft angle is shown in real time. Setați Draft Angle introducând o valoare sau făcând clic pe săgețile sus / jos. Draft angle aplicat este afișat în timp real.

Plan Neutru

Click pe Neutral Plane, apoi selectați planul care nu trebuie să se schimbe dimensional. Schimbarea se face în timp real.

Pull Direction

Click Pull Direction, și apoi selctați muchia. Pull Direction este eficientă doar dacă Neutral Plane a fost definit. Resultatele pot fi impredictibile.

Reverse Pull Direction

Checking Reverse Pull Direction va comuta draft din unghi pozitiv în unghi negativ.

Cazuri speciale

Instrumentul Draft va funcționa numai pe fațete care sunt normale una față de cealaltă. Dacă există fațete tangențiale atașate la fața pe care doriți să le aplicați, va eșua. O cauză obișnuită a eșecului este încercarea de a aplica schița unei fețe care are deja o rotunjire sau o șanfren aplicate. În acest caz, îndepărtați suprafața tangențială, aplicați draft în funcție de necesități, apoi reaplicați rotunjirea sau șanfernul.

Remember:

Since there must be at least one face for the feature, the last remaining face in the list cannot be removed.

Edit a draft

Do one of the following:
- Double-click the Draft object in the Tree view.
- Right-click the Draft object in the Tree view and select Edit Draft from the context menu.
The Draft parameters task panel opens. See Options for more information.
Press the OK button to finish.

Options

Add face: Add faces to the selection by pressing the Add face button and selecting more faces.
Remove face: Choose a way to remove faces from the selection:
- Select one or more faces in the list and press the Del key or right-click the list and select Remove from the context menu.
- Press the Remove face button. All previously selected faces are highlighted in purple. Select each face to be removed.
Draft angle: Set the Draft angle either by entering a value or by clicking the up/down arrows.
Neutral plane: Set the the neutral plane by pressing the Neutral plane button and selecting the plane that must not change dimensionally.
Pull direction: Set the the pull direction by pressing the Pull direction button, then select an edge. Pull Direction is only effective if the Neutral Plane has been set. Results can be unpredictable.
Reverse pull direction: Invert the pull direction by checking the Reverse pull direction checkbox. This will toggle the draft between positive and negative angles.

Notes

The Draft tool will only work on faces that are not tangentially connected to other faces. A common mistake is to attempt to apply draft to a face that already has a fillet applied to it. To solve this, remove the fillet, apply the draft as needed, then re-apply the fillet.

Properties

Data

Base

DateAngle (Angle): Cannot be negative. Default: 1.5 °.
DateReversed (Bool): Default: false.
DateBase (LinkSub): Sub-link to the parent feature's list of selected edges and faces.
DateSupport Transform (Bool): Include the base additive/subtractive shape when used in pattern features. If disabled, only the dressed part of the shape is used for patterning. Default: false.
Date (hidden)Add Sub Shape (PartShape)
Date (hidden)Base Feature (Link): Link to the parent feature.
Date (hidden)_ Body (LinkHidden): Link to the parent body.

Draft

DateNeutral Plane (LinkSub): Sub-link to the parent feature's list containing the neutral plane.
DatePull Direction (LinkSub)

Part Design

DateRefine (Bool): Refine shape (clean up redundant edges) after adding/subtracting. The default value is determined by the Automatically refine model after sketch-based operation preference. See PartDesign Preferences.

Chamfer

Thickness

PartDesign

Structure tools: Part, Group
Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a shape binder, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system

Modeling tools:
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, ‎Subtractive wedge
- Boolean: Boolean operation

Dress-up tools: Fillet, Chamfer, Draft, Thickness
Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled

Extras: Sprocket, Involute gear, Shaft design wizard
Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
Preferences: Preferences, Fine tuning

User documentation

Getting started
Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

Help: Tutorials, Video tutorials
Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

Addons: Addon Manager, External workbenches, Scripting and macros

Hubs: User hub, Power users hub, Developer hub