PartDesign CoordinateSystem/ru

Создать опорную плоскость

Создать связующую форму

Верстак "PartDesign"

Описание

Creates a local coordinate system which can be used as reference for other datum geometry. It also helps identify the orientation of the referenced datum geometry in 3D space.

Local coordinate system originating out of a datum plane's origin.

Применение

1. Press the Create a local coordinate system button.
2. Define Coordinate System parameters. Select a first reference in the 3D view to filter the available attachment modes.
3. Depending on the selected reference, there may be one or more attachment modes available in the the list. The most likely one will automatically be selected and shown in bold in the list. The text Attached with mode along with the attachment mode name will appear in green at the top of the Parameters panel.
4. To add an additional reference, press the next Reference button. Once pressed its label changes to Selecting... until a selection is made.
5. Select an attachment mode in the list.
6. Define Attachment Offset values.
7. Press OK.

Опции

Double-click the Local_CS label in the Model tree or right-click and select Edit datum in the contextual menu to edit its parameters. For more details about Attachment mode and Attachment offset, see Attachment.

Preferences

See PartDesign Plane.

Свойства

Данные

• ДанныеMapMode: lists the attachment mode used.
• ДанныеAttachment Reversed: indicates if the coordinate system is reversed in orientation.
• ДанныеAttachment Offset: applies a transformation (translation and rotation) in reference to the attachment placement.
• ДанныеPlacement: indicates the coordinates and alignment of the coordinates system´s origin .
• ДанныеLabel: name given to the object, this name can be changed at convenience.

Программирование

lcs = App.activeDocument().addObject( 'PartDesign::CoordinateSystem', 'LCS' )

Создать опорную плоскость

Создать связующую форму

Верстак "PartDesign"

PartDesign

• Инструменты структуры: Part, Group
• Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face

---

• Инструменты моделирования
  • Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
  • Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
  • Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, ‎Subtractive wedge

---

• Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
• Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
• Бинарные: Boolean operation

---

• Дополнительно: Migrate, Shaft design wizard, Involute gear
• Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков