Fasteners ChangeParameters
|
|
| Menu location |
|---|
| Fasteners → Change fastener parameters |
| Workbenches |
| Fasteners |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| None |
Description
The 
Fasteners ChangeParameters command can be used to change the parameters of fasteners.
Usage
- Select one or more fasteners. If multiple fasteners are selected they must be either only screws, only washers or only nuts.
- There are several ways to invoke the command:
- Press the
Change fastener parameters button. - Select the Fasteners → Change fastener parameters option from the menu.
- Press the
- The Change fastener parameters task panel opens.
- Optionally change the Fastener type.
- Optionally change the diameter by doing one of the following:
- Check the Auto set diameter checkbox to match the diameter of the fasteners with the edge they are attached to.
- Uncheck the Auto set diameter checkbox and select a Diameter from the dropdown list.
- Optionally check the Set length checkbox and enter a new length. The length must be valid for the fastener.
- Press the OK button to confirm.
