Silk ControlGrid44 2EdgeSegments
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
|
| Menu location |
|---|
| Sik → ControlGrid44_2EdgeSegments |
| Workbenches |
| Silk |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| None |
Description
The 
Silk ControlGrid44_2EdgeSegments command creates a ControlGrid44 from a CubicSurface_44 and two CubicCurve_4 segments.
A rectangular corner segment cut from a CubicSurface_44
Usage
- Select in the 3D View:
- A CubicSurface_44.
- A CubicCurve_4 that matches part of an edge of that surface.
- Another CubicCurve_4 that matches part of an adjacent edge of that surface.
- (the two partial curves cannot be on opposite edges of the surface).
- There are several ways to invoke the command.
- Press the
ControlGrid44_2EdgeSegments button. - Select the Silk → ControlGrid44_2EdgeSegments option from the menu.
- Press the
- A ControlGrid44_2EdgeSegments object, is created.
Properties
See also: Property View.
A ControlGrid44_2EdgeSegments is derived from a ..., formally a yyy object and inherits all its properties. It also has the following additional property:
Data
xxx
- DataBase View (
PropertyLink): Referenced view.