Macro Assemblage Imprimante 3D/pl
|
|
| Opis |
|---|
| Symuluje ruch drukarki 3D w osi Z.
Autorem skryptu jest Javier Martínez García (JMG), a skrypt został dostosowany do tego projektu. |
| Autor |
| fran6t |
| Do pobrania |
| Nie plik .FCStd do testowania Ikona paska narzędzi |
| Odnośniki |
| Przepisy na makropolecenia Jak zainstalować makrodefinicje Dostosowanie pasków narzędzi |
| Wersja Makrodefinicji |
| 1.0 |
| Data zmian |
| 2015-07-13 |
| Wersja FreeCAD |
| 0.15 |
| Domyślny skrót |
| Brak |
| Zobacz również |
| - |
Opis
Symuluje ruch drukarki 3D w osi Z.
Użycie
Pobierz plik i otwórz go we FreeCAD.
Skopiuj makro, wklej je w konsoli Pythona i korzystaj.
Aby zatrzymać animację, użyj polecenia: animation.stop()
Plik
Skrypt
Autorem skryptu jest Javier Martínez García (JMG), a skrypt został dostosowany do tego projektu.
ToolBar Icon 
00-assemblage-total.FCMacro
# Mouvement va et vient du chariot et tete selon axe Z
#
# Pour arreter l'animation il faut taper animation.stop() dans la console
__author__ = "Javier Martínez García"
import FreeCAD as App, FreeCADGui as Gui, Part, time, sys, math, Draft, DraftGeomUtils
try:
from PyQt4 import QtGui,QtCore
except Exception:
from PySide import QtGui,QtCore
class Animation(object):
def __init__(self):
App.Console.PrintMessage('init')
App.ActiveDocument.recompute()
self.timer = QtCore.QTimer()
QtCore.QObject.connect(self.timer, QtCore.SIGNAL("timeout()"), self.my_update)
self.timer.start(50)
self.an = 0
self.Tige_Guide_X = 142
self.X_End_Tendeur = 90
self.X_Chariot = 102
self.Nema_17_motor_X = 119
self.Anti_Backslash_Z_Gauche = 88
self.Jhead_droite = 126.5
self.enstopX = 168
self.sens = 1
def my_update(self):
if ( self.an == 0 ) :
self.sens = 1
if ( self.an == 245 ) :
self.sens = -1
self.an = self.an + self.sens
self.Tige_Guide_X = self.Tige_Guide_X + self.sens
self.X_End_Tendeur = self.X_End_Tendeur + self.sens
self.X_Chariot = self.X_Chariot + self.sens
self.Nema_17_motor_X = self.Nema_17_motor_X + self.sens
self.Jhead_droite = self.Jhead_droite + self.sens
self.Anti_Backslash_Z_Gauche = self.Anti_Backslash_Z_Gauche + self.sens
self.enstopX = self.enstopX + self.sens
#12-X-End-Moteur
#FreeCAD.getDocument("_0_assemblage_total").getObject("Pocket013").Placement = App.Placement(App.Vector(-133,0,self.an),App.Rotation(App.Vector(0,0,1),0))
FreeCAD.getDocument("_0_assemblage_total").getObject("refine002").Placement = App.Placement(App.Vector(0,0,self.an),App.Rotation(App.Vector(0,0,1),0))
#Tige-Guide-X
FreeCAD.getDocument("_0_assemblage_total").getObject("Pad025").Placement = App.Placement(App.Vector(-180,13.55,self.Tige_Guide_X),App.Rotation(App.Vector(0.57735,0.57735,0.57735),120))
#14-X-End-Tendeur
FreeCAD.getDocument("_0_assemblage_total").getObject("Pocket011").Placement = App.Placement(App.Vector(236,0,self.X_End_Tendeur),App.Rotation(App.Vector(0,0,1),0))
#13-X-Chariot
FreeCAD.getDocument("_0_assemblage_total").getObject("Pocket014").Placement = App.Placement(App.Vector(-18,25,self.X_Chariot),App.Rotation(App.Vector(1,0,0),90))
#Nema-17-motor-X
FreeCAD.getDocument("_0_assemblage_total").getObject("Chamfer003").Placement = App.Placement(App.Vector(-205.2,63,self.Nema_17_motor_X),App.Rotation(App.Vector(1,0,0),90))
#15-Anti-Backslash-Z-x2-1
FreeCAD.getDocument("_0_assemblage_total").getObject("Pad012").Placement = App.Placement(App.Vector(-156,-15,self.Anti_Backslash_Z_Gauche),App.Rotation(App.Vector(0.999985,0.00555547,0),180))
#Jhead-Droite
FreeCAD.getDocument("_0_assemblage_total").getObject("Pocket015").Placement = App.Placement(App.Vector(-50.8,-4.4,self.Jhead_droite),App.Rotation(App.Vector(0,0,1),0))
#Endstop X
FreeCAD.getDocument("_0_assemblage_total").getObject("refine003").Placement = App.Placement(App.Vector(-154.2,15,self.enstopX),App.Rotation(App.Vector(0.57735,0.57735,-0.57735),120))
def stop(self):
self.timer.stop()
animation = Animation()
Łącze
Strona dyskusji na forum: Je galere pour tourner une piece
Kanał YouTube twórcy makra FreeCAD: Gear Animation Tutorial i jego blog