PartDesign SubtractiveWedge/pt-br

PartDesign SubtractiveWedge
Menu location
Part Design → Subtractive Primitive → Subtractive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign AdditiveWedge

Description

Inserts a subtractive wedge in the active Body. Its shape is subtracted from the existing solid.

On the left: active body (A) shown in grey and subtractive wedge (B) shown in transparent red; result on the right.

Usage

1. There are several ways to invoke the tool:
   • Press the Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Subtractive Primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
   • Select the Part Design → Subtractive Primitive → Subtractive Wedge option from the menu.
2. Set the Primitive Parameters and Attachment.
3. Click OK.
4. A Wedge feature appears under the active Body.

Options

The Wedge can be edited after its creation in two ways:

• Double-clicking it in the Tree View, or by right-clicking and selecting Edit Primitive in the context menu; this brings up the Primitive Parameters.
• Via the Property View.

Properties

Using the default placement, the below inputs are:

• DadosX min/max : Base face X-axis span
• DadosY min/max: Wedge height span
• DadosZ min/max : Base face Z-axis span
• DadosX2 min/max : Top face X-axis span
• DadosZ2 min/max : Top face Z-axis span

Pyramids

Wedges can be used to create pyramids by setting DadosX2 min/max and DadosZ2 min/max each so that min = max.