Macro Airfoil Import & Scale/de

Wie benutzt man - Version 1.5

Die Datei auswählen

Beim Ausführen des Makros wird dem Benutzer zunächst ein Datei-Browser angezeigt, in dem die gewünschte .dat-Tragflächen-Datei ausgewählt werden kann. Zum Speicherort der Tragflächen-Datei navigieren, diese auswählen und Öffnen drücken.

Profilsehnenlänge eingeben

Sobald die Profil-Datei ausgewählt wurde, erscheint ein neues Dialogfeld, in dem nach der Sehnenlänge gefragt wird. Eine beliebige Länge in Millimetern eingeben. Sobald die gewünschte Länge eingegeben wurde, erstellt das Makro einen Linienzug (DWire) gemäß den Punkten, die in der zuvor ausgewählten .dat-Profil-Datei beschrieben sind, und zwar in dem Maßstab, der für die Sehnenlänge eingegeben wurde.

Das Airfoil ist nun richtig skaliert und kann nun in Ihrem Projekt verwendet werden.

Wie benutzt man - Version 2

Die Dateiauswahl entspricht der Version 1.5. Mit Version 2 hat man nun die Wahl, entweder das resultierende Profil mit einem Draft-Linienzug (DWire) oder einem Basic Spline (B-Spline) erstellen zu lassen. Wie bei Version 1.5 wird die gewünschte Profilsehnenlänge eingegeben. Zusätzlich kann jetzt die Art Tragfläche ausgewählt werden. Einfach auf das Optionsfeld B-Spline klicken oder wie für das Standard-DWire belassen.

Die Makros

Version 1.5

Macro_Airfoil_Import_&_Scale.FCMacro

# # # #
#
# AIRFOIL IMPORT & SCALE v1.5
# 
# Imports and scales an Airfoil in the form of a Draft Wire (DWire) 
#
# # # #


from PySide import QtCore, QtGui
from PySide.QtGui import QLineEdit
import FreeCAD, FreeCADGui, Draft
import importAirfoilDAT

# Select .dat airfoil data file to be imported

filename = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat')

class p():

    def proceed(self):
            try:
                
                # This produces a scaled Airfoil with a DWire

                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
            
            except:
                FreeCAD.Console.PrintError("Error, not a valid .dat file\n")

            self.close()

    def close(self):
        self.dialog.hide()

    def __init__(self):
        self.dialog = None
        self.s1 = None

        # Make dialog box and get the scale size

        self.dialog = QtGui.QDialog()
        self.dialog.resize(350,100)
        self.dialog.setWindowTitle("Airfoil Import & Scale")
        la = QtGui.QVBoxLayout(self.dialog)
        t1 = QtGui.QLabel("Chord Length")
        la.addWidget(t1)
        self.s1 = QtGui.QLineEdit()
        la.addWidget(self.s1)

        # Add OK / Cancel buttons

#ori        okbox = QtGui.QDialogButtonBox(self.dialog)
#ori        okbox.setOrientation(QtCore.Qt.Horizontal)
#ori        okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel -PIPE- QtGui.QDialogButtonBox.Ok)
#        modify original code for install with addon-install cause -PIPE- 05-12-2016 FC 0.16

        okbox = QtGui.QDialogButtonBox(self.dialog)
        okbox.setOrientation(QtCore.Qt.Horizontal)
        okbox.setStandardButtons(QtGui.QDialogButtonBox.Ok)

        cancelbox = QtGui.QDialogButtonBox(self.dialog)
        cancelbox.setOrientation(QtCore.Qt.Horizontal)
        cancelbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel)
        cancelbox.move(0,62)

        la.addWidget(okbox)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed)
        QtCore.QObject.connect(cancelbox, QtCore.SIGNAL("rejected()"), self.close)
        QtCore.QMetaObject.connectSlotsByName(self.dialog)
        self.dialog.show()
        self.dialog.exec_()

p()

Version 2

# # # #
#
# AIRFOIL IMPORT & SCALE v2.
# 
# Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline)
#
# For FreeCAD Versions = or > 0.14 Revision 3077
#
# Works best with OCC/OCE = or > 6.7
#
# # # #


from PySide import QtCore, QtGui
from PySide.QtGui import QLineEdit, QRadioButton
import FreeCAD, FreeCADGui, Draft
import importAirfoilDAT

# Select .dat airfoil data file to be imported

filename = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat')

class p():

    def proceed(self):
        if self.radio1.isChecked():
            try:
                
                # This produces a scaled Airfoil with a DWire

                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
            
            except:
                FreeCAD.Console.PrintError("Error, not a valid .dat file\n")

            self.close()

        if self.radio2.isChecked():
            try:

                # This produces a scaled Airfoil with a BSpline

                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                points = FreeCAD.ActiveDocument.ActiveObject.Points
                Draft.makeBSpline(points, closed=True)
                Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
                App.getDocument("Unnamed").removeObject("DWire")

            except:
                FreeCAD.Console.PrintError("Error, not a valid .dat file\n")

            self.close()

    def close(self):
        self.dialog.hide()


    def __init__(self):
        self.dialog = None
        self.s1 = None


        # Make dialog box and get the scale size

        self.dialog = QtGui.QDialog()
        self.dialog.resize(350,100)
        self.dialog.setWindowTitle("Airfoil Import & Scale")
        la = QtGui.QVBoxLayout(self.dialog)
        t1 = QtGui.QLabel("Chord Length")
        la.addWidget(t1)
        self.s1 = QtGui.QLineEdit()
        la.addWidget(self.s1)

        # Add radio buttons to select between DWire and BSpline

        self.radio1 = QRadioButton("Make DWire")
        self.radio2 = QRadioButton("Make BSpline")

            # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to
            # self.radio2.setChecked(True) to set BSpline as default

        self.radio1.setChecked(True)
        la.addWidget(self.radio1)
        la.addWidget(self.radio2)

        # Add OK / Cancel buttons

        okbox = QtGui.QDialogButtonBox(self.dialog)
        okbox.setOrientation(QtCore.Qt.Horizontal)
        okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        la.addWidget(okbox)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close)
        QtCore.QMetaObject.connectSlotsByName(self.dialog)
        self.dialog.show()
        self.dialog.exec_()

p()

Version 2.1

Von mangtronix aktualisiert, um PySide anstelle von PyQt (in älteren Versionen von FreeCAD verwendet) zu verwenden.

# # # #
#
# AIRFOIL IMPORT & SCALE v2.1
# 
# Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline)
#
# For FreeCAD Versions = or > 0.14 Revision 3703
#
# Works best with OCC/OCE = or > 6.7
#
# # # #
 
 
from PySide import QtCore, QtGui
from PySide.QtGui import QLineEdit, QRadioButton
import FreeCAD, FreeCADGui, Draft
import importAirfoilDAT
 
# Select .dat airfoil data file to be imported
 
# PySide returns a tuple (filename, filter) instead of just a string like in PyQt
filename, filefilter = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(),'Open An Airfoil File','*.dat')

class p():
 
    def proceed(self):
        global filename
        if self.radio1.isChecked():
            #if True:
            try:
 
                # This produces a scaled Airfoil with a DWire
 
                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
 
            except Exception, e:
                FreeCAD.Console.PrintError("Error, not a valid .dat file\n")
 
            self.close()
 
        if self.radio2.isChecked():
            try:
 
                # This produces a scaled Airfoil with a BSpline
 
                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                points = FreeCAD.ActiveDocument.ActiveObject.Points
                Draft.makeBSpline(points, closed=True)
                Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
                App.getDocument("Unnamed").removeObject("DWire")
 
            except:
                FreeCAD.Console.PrintError("Error, not a valid .dat file\n")
 
            self.close()
 
    def close(self):
        self.dialog.hide()
 
 
    def __init__(self):
        self.dialog = None
        self.s1 = None
 
 
        # Make dialog box and get the scale size
 
        self.dialog = QtGui.QDialog()
        self.dialog.resize(350,100)
        self.dialog.setWindowTitle("Airfoil Import & Scale")
        la = QtGui.QVBoxLayout(self.dialog)
        t1 = QtGui.QLabel("Chord Length")
        la.addWidget(t1)
        self.s1 = QtGui.QLineEdit()
        la.addWidget(self.s1)
 
        # Add radio buttons to select between DWire and BSpline
 
        self.radio1 = QRadioButton("Make DWire")
        self.radio2 = QRadioButton("Make BSpline")
 
            # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to
            # self.radio2.setChecked(True) to set BSpline as default
 
        self.radio1.setChecked(True)
        la.addWidget(self.radio1)
        la.addWidget(self.radio2)
 
        # Add OK / Cancel buttons
 
        okbox = QtGui.QDialogButtonBox(self.dialog)
        okbox.setOrientation(QtCore.Qt.Horizontal)
        okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        la.addWidget(okbox)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close)
        QtCore.QMetaObject.connectSlotsByName(self.dialog)
        self.dialog.show()
        self.dialog.exec_()
 
p()

Version 2.1.2

Werkzeugleisten-Symbol

Macro_Airfoil_Import_&_Scale.FCMacro

# This Macro, when run, will first provide the user with a file browser to
# locate and select a .dat airfoil text file. Once selected, a chord length is
# entered and upon pressing the OK button, a properly scaled airfoil is
# produced. There are two versions provided here. Version 1.5 should work on
# FreeCAD versions, 0.13 stable as well as all 0.14 versions. Version 2 should
# only be used with FreeCAD versions equal to or greater than 0.14 3077 and
# will work best with versions built with OCE/OCC versions 6.7 or greater (See
# the Wiki page for all available version).
#
# (c) quick61

__Name__ = 'Airfoil Import and Scale'
__Comment__ = 'Imports and scales an Airfoil in the form of a Draft Wire (DWire) or Basic Spline (BSpline)'
__Author__ = "quick61"
__Version__ = '2.1.2'
__Date__ = '2019-07-16'
__License__ = ''
__Web__ = "https://forum.freecad.org/viewtopic.php?f=22&t=5554"
__Wiki__ = "https://www.freecad.org/wiki/Macro_Airfoil_Import_%26_Scale"
__Icon__ = 'https://www.freecad.org/wiki/images/0/0c/Macro_Airfoil_Import_%26_Scale.png'
__Help__ = ''
__Status__ = 'stable'
__Requires__ = 'Freecad >= 0.14.3706'
__Communication__ = ''
__Files__ = ''


import FreeCAD as app
import PySide
from PySide import QtCore, QtGui
from PySide.QtGui import QLineEdit, QRadioButton
import Draft
import importAirfoilDAT


# Select .dat airfoil data file to be imported

# PySide returns a tuple (filename, filter) instead of just a string like in PyQt

global filename
global nameFile

try:
    filename, filefilter = QtGui.QFileDialog.getOpenFileName(QtGui.qApp.activeWindow(), 'Open An Airfoil File', '*.dat')
except Exception:
    param = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Macro")# macro path
    path = param.GetString("MacroPath","") + "/"                        # macro path
    filename, filefilter = PySide.QtGui.QFileDialog.getOpenFileName(None, "Open An Airfoil File", path, "*.dat")

nameFile = filename.split("/")[-1][:-4]

class AirfoilImporterAndScaler():
    def __init__(self):
        self.dialog = None
        self.s1 = None

        # Make dialog box and get the scale size
        self.dialog = QtGui.QDialog()
        self.dialog.resize(350,100)
        self.dialog.setWindowTitle("Airfoil Import & Scale")
        la = QtGui.QVBoxLayout(self.dialog)
        t1 = QtGui.QLabel("Chord Length")
        la.addWidget(t1)
        self.s1 = QtGui.QLineEdit()
        la.addWidget(self.s1)

        # Add radio buttons to select between DWire and BSpline
        self.radio1 = QtGui.QRadioButton("Make DWire")
        self.radio2 = QtGui.QRadioButton("Make BSpline")

        # set default to DWire & make radio buttons - Change self.radio1.setChecked(True) to
        # self.radio2.setChecked(True) to set BSpline as default

        self.radio1.setChecked(True)
        la.addWidget(self.radio1)
        la.addWidget(self.radio2)

        # Add OK / Cancel buttons
        okbox = QtGui.QDialogButtonBox(self.dialog)
        okbox.setOrientation(QtCore.Qt.Horizontal)
        okbox.setStandardButtons(QtGui.QDialogButtonBox.Cancel|QtGui.QDialogButtonBox.Ok)
        la.addWidget(okbox)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("accepted()"), self.proceed)
        QtCore.QObject.connect(okbox, QtCore.SIGNAL("rejected()"), self.close)
        QtCore.QMetaObject.connectSlotsByName(self.dialog)
        self.dialog.show()
        self.dialog.exec_()



    def proceed(self):
        global filename
        global nameFile

        if self.radio1.isChecked():
            try:
                # This produces a scaled Airfoil with a DWire
                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                try:
                    Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
                except Exception:
                    Draft.scale(App.ActiveDocument.ActiveObject,scale=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0.0,0.0,0.0),copy=False)
                
                App.ActiveDocument.ActiveObject.Label = nameFile + "_(DWire)"

            except Exception as e:
                app.Console.PrintError("Error, not a valid .dat file\n")

        if self.radio2.isChecked():
            try:
                # This produces a scaled Airfoil with a BSpline
                scalefactor=float(self.s1.text())
                f1=str(filename)
                importAirfoilDAT.insert(f1,"Unnamed")
                points = app.ActiveDocument.ActiveObject.Points
                App.getDocument("Unnamed").removeObject(App.ActiveDocument.ActiveObject.Name)
                Draft.makeBSpline(points, closed=True)
                try:
                    Draft.scale(App.ActiveDocument.ActiveObject,delta=App.Vector(scalefactor,scalefactor,scalefactor),center=App.Vector(0,0,0),legacy=True)
                except Exception:
                    for i in range(len(points)):
                        Draft.scaleVertex(App.ActiveDocument.ActiveObject, i, App.Vector(scalefactor,scalefactor,scalefactor), App.Vector(0.0,0.0,0.0))

                App.ActiveDocument.ActiveObject.Label = nameFile + "_(BSpline)"

            except:
                app.Console.PrintError("Error, not a valid .dat file\n")

        try:    
            # delete the directory created by importAirfoilDAT
            for obj in App.ActiveDocument.Objects:
                if (obj.TypeId == "App::DocumentObjectGroup") and (obj.Name == nameFile):
                    App.getDocument("Unnamed").removeObject(nameFile)
        except Exception:
            None

        self.close()    # close the window

    def close(self):
        self.dialog.hide()


AirfoilImporterAndScaler()