Macro FCInfoToMouse/de
|
|
| Beschreibung |
|---|
| Zeigt neben dem Mauszeiger in Echtzeit Informationen zu Koordinaten, Länge und Winkeln an. Versionsmakro : 00.04 Datum der letzten Änderung : 2018-03-27 Herunterladen : Werkzeugleisten-Symbol Autor: Mario52 |
| Autor |
| Mario52 |
| Herunterladen |
| Werkzeugleisten-Symbol |
| Links |
| Makros Rezepte Wie man Makros installiert Symbolleisten anpassen |
| Macro-Version |
| 00.04 |
| Datum der letzten Änderung |
| 2018-03-27 |
| FreeCAD-Version(s) |
| None |
| Standardverknüpfung |
| None |
| Siehe auch |
| None |
Beschreibung
Liefert Informationen zu Koordinaten, Länge und Winkeln in Echtzeit neben dem Mauszeiger in einer Blasenbeschriftung, die in der 3D-Ansicht angezeigt werden.
Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro
# This code is copied instead of the original macro code
# to guide the user to the online download page.
# Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki
# or if the RAW code URL is somewhere else in the wiki.
from PySide import QtGui, QtCore
diag = QtGui.QMessageBox(QtGui.QMessageBox.Information,
"Information",
"This macro must be downloaded from this link\n"
"\n"
"https://gist.githubusercontent.com/mario52a/974214c4b83beaa41495/raw/7789c1995dba2af74a14d549638267f7740c036c/Macro_FCInfoToMouse.FCMacro" + "\n"
"\n"
"Quit this window to access the download page")
diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint)
diag.setWindowModality(QtCore.Qt.ApplicationModal)
diag.exec_()
import webbrowser
webbrowser.open("https://gist.githubusercontent.com/mario52a/974214c4b83beaa41495/raw/7789c1995dba2af74a14d549638267f7740c036c/Macro_FCInfoToMouse.FCMacro")
FCInfo an Maus-Makro in Aktion
Anwendung
- Install the FCInfoToMouse macro in your macros directory via the Addon Manager
- Run the Macro
- Result: an annotation appears and the mouse coordinate information is displayed in real-time.
Bild 1
- X, Y, Z: mouse coordinates are displayed in the bubble (this only applies when "Single" mode is enabled) as seen in Fig. 1
- Once the mouse is clicked for the first time, additional info is displayed (when "Forced" mode is enabled this setting will be solely displayed)
Bild 2
- X1, Y1, Z1 : Initial coordinates of the 1st mouse click
- X2, Y2, Z2 : Current coordinates of the mouse
- L : Length between the first mouse click and the location of the current mouse pointer
- XY, YZ, XZ : Angles between the 1st point and moving mouse pointer in the XY, YZ, and XZ planes
Figure 3 - when mouse pointer is over an object, the name of the object will be displayed
- If the mouse hovers over an object, the object name appears at the top of the annotation (see Figure 3).
Tastenkombinationen
SHIFT + Q: Quit the FCInfoToMouse macro. Upon quitting the macro, the annotation remains at its current mouse pointer location. Begin using the mouse normally if you want to delete the annotation manually.
SHIFT + M: Toggle the mode between:
- single which displays only the coordinates of the mouse pointer (Figure 1)
- force which displays the "comprehensive visualisation" (Figure 2)
- normal which displays the default behavior of the macro
SHIFT + C : for "hidden / visible"
SHIFT + D : to "Open/Close" a Spreadsheet with the coordinates saved to:
Cell A Cell B Cell C Cell D x, y, z x y z
Hinweise
Die Eigenschaften der Anmerkung können jederzeit geändert werden, indem in der Kombinationsansicht auf das Objekt „FCInfoZuMaus“ geklickt wird und dann auf die Registerkarte „Ansicht“ geklickt wird.
Wenn die Anzahl der Dezimalstellen geändert werden soll, die Zeile 43 (Standardwert 4) ändern.
Beispiel für sechs Dezimalstellen:
original value
global arrondi ; arrondi = 4
replace to
global arrondi ; arrondi = 6
To make the configuration of the permanent annotation you can change the values in the configuration section lines 104 to 122
Skript
Das Symbolbild FCInfoToMouse.png 
.
Macro_FCInfoToMouse.FCMacro
# -*- coding: utf-8 -*-
"""
***************************************************************************
* Copyright (c) 2016 <mario52> *
* *
* This file is a supplement to the FreeCAD CAx development system. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU Lesser General Public License (LGPL) *
* as published by the Free Software Foundation; either version 2 of *
* the License, or (at your option) any later version. *
* for detail see the LICENCE text file. *
* *
* This software is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU Library General Public License for more details. *
* *
* You should have received a copy of the GNU Library General Public *
* License along with this macro; if not, write to the Free Software *
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
* USA *
***************************************************************************
* WARNING! All changes in this file will be lost and *
* may cause malfunction of the program *
***************************************************************************
"""
# https://forum.freecad.org/viewtopic.php?f=22&t=9215
# FCInfoToMouse
__title__ = "FCInfoToMouse"
__author__ = "Mario52"
__url__ = "https://wiki.freecad.org/Macro_FCInfoToMouse"
__version__ = "00.04"
__date__ = "27/03/2018"
#
import Draft, Part
import math,FreeCAD
from FreeCAD import Base
import time
App = FreeCAD
global arrondi ; arrondi = 4
global objectAnn ; objectAnn = ""
global positionX1 ; positionX1 = 0.0
global positionY1 ; positionY1 = 0.0
global positionZ1 ; positionZ1 = 0.0
global force ; force = 0
global hidden ; hidden = 0
global coorBegin ; coorBegin = ""
global pas ; pas = 0
global spreadSheet; spreadSheet= 0
global compteur ; compteur = 0
global spread ; spread = ""
from math import sqrt, pi, sin, cos, asin, acos, atan, atan2, degrees
def angle2(vecteur_x1,vecteur_y1,vecteur_x2,vecteur_y2,mode): #tester getAngle ( Vector )
# calcul de l'inclinaison d'une ligne a partir de deux Vecteurs
# si "mode" = 1 alors affichage en degres sinon en radian
try:
deltaX = vecteur_x2 - vecteur_x1
deltaY = vecteur_y2 - vecteur_y1
if mode ==1:
angle = degrees(atan2(float(deltaY),float(deltaX))) # degres (mode = 1)
else:
angle = atan2(float(deltaY),float(deltaX)) # radian (mode = 0)
return round(angle,arrondi)
except Exception:
None
def sub(first, other):
"sub(Vector,Vector) - subtracts second vector from first one"
if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
return FreeCAD.Vector(first.x-other.x, first.y-other.y, first.z-other.z)
def length(first):
"lengh(Vector) - gives vector length"
if isinstance(first,FreeCAD.Vector):
return math.sqrt(first.x*first.x + first.y*first.y + first.z*first.z)
def dist(first, other):
"dist(Vector,Vector) - returns the distance between both points/vectors"
if isinstance(first,FreeCAD.Vector) and isinstance(other,FreeCAD.Vector):
return length(sub(first,other))
def codeColor(color):
try:
rgb = float((float(color)/255.0))
except Exception:
rgb = 0.0
return rgb
doc = FreeCAD.ActiveDocument
if doc == None:
doc = FreeCAD.newDocument()
# for modify the configuration : line 104 to 122
# PS: if DisplayMode = "Line" and Frame = False the annotation is transparent
#
##### Configuration Modify here # Begin #######################################
#
#BackgroundColor : #
red_B = 0.0 # 0.0 to 255.0 #
green_B = 84.0 # 0.0 to 255.0 #
blue_B = 255.0 # 0.0 to 255.0 #
#
displayMode = "Line" # "Line" or "Object" #
fontName = "MS Shell Dlg 2" # "MS Shell Dlg 2" for Windows #
fontSize = 8.0 # Font size #
frame = False # "False" or "True" #
justification = "Left" # "Left", "Right", "Center" #
#
#TextColor : #
red_T = 255.0 # 0.0 to 255.0 #
green_T = 255.0 # 0.0 to 255.0 #
blue_T = 255.0 # 0.0 to 255.0 #
#
##### Configuration End End ###################################################
v=Gui.activeDocument().activeView()
objectAnn = App.ActiveDocument.addObject("App::AnnotationLabel","FCInfoToMouse")# create work annotation
objectAnn.LabelText=["Hello FreeCAD World"]
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).BackgroundColor = (codeColor(red_B),codeColor(green_B),codeColor(blue_B)) #
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).DisplayMode = displayMode #
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).FontName = fontName #
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).FontSize = fontSize #
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).Frame = frame #
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).Justification = justification #
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).TextColor = (codeColor(red_T),codeColor(green_T),codeColor(blue_T)) #
import os, sys, platform
global PolicePath; PolicePath = ""
#if platform.system() == "Windows" :
# PolicePath = "C:/Windows/Fonts/ARIAL.TTF"
#elif platform.system() == "Linux" :
# PolicePath = "/usr/share/fonts/truetype/ubuntu-font-family/Ubuntu-M.ttf"
#elif platform.system() == "Darwin":
# PolicePath = "/Library/Fonts/Arial.ttf"
#else:
# PolicePath = "C:/Windows/Fonts/ARIAL.TTF"
p=FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Draft")
PolicePath = p.GetString("FontFile")
class ViewObserver:
def __init__(self, view):
self.view = view
def logPosition(self, info):
global objectAnn
global positionX1, positionY1, positionZ1
global pas, arrondi
global coorBegin
global force
global hidden
global PolicePath
global spreadSheet
global compteur
global spread
######## for testing key ############
# try: #
# print info["Key"] #
# print info["State"] #
## print ord(info["Key"]) #
# except Exception: #
# None #
#####################################
Button1 = 0
try:
if (info["Key"] == "Q") and (info["State"] == "DOWN"): # SHIFT + Q for quit
v.removeEventCallback("SoEvent",c) # close event observation
FreeCAD.Console.PrintMessage( "End FCInfoToMouse" + "\n")
except Exception:
None
try:
if (info["Key"] == "M") and (info["State"] == "DOWN"): # SHIFT + M for force display
if force == 0:
force = 1
FreeCAD.Console.PrintMessage( "Forced " + "\n")
elif force == 1:
force = 2
FreeCAD.Console.PrintMessage( "Single " + "\n")
elif force == 2:
force = 0
FreeCAD.Console.PrintMessage( "Normal " + "\n")
except Exception:
None
try:
if (info["Key"] == "C") and (info["State"] == "DOWN"): # SHIFT + C for hidden / visible annotation OK
if hidden == 0:
hidden = 1
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).Visibility = False
FreeCAD.Console.PrintMessage( "concealed " + "\n")
else:
hidden = 0
FreeCADGui.getDocument(doc.Name).getObject(objectAnn.Label).Visibility = True
FreeCAD.Console.PrintMessage( "visible " + "\n")
except Exception:
None
try:
if (info["Key"] == "D") and (info["State"] == "DOWN"): # SHIFT + S for Open spreadSheet
if spreadSheet == 0:
#spread = FreeCAD.ActiveDocument.getObjectsByLabel(spread.Name)[0] # for append in existant SpreadSheet
spread = App.activeDocument().addObject('Spreadsheet::Sheet','MySpreedSheett')
spreadSheet = 1
FreeCAD.Console.PrintMessage("SpreadSheet open : " + spread.Name + "\n")
else:
spreadSheet = 0
FreeCAD.Console.PrintMessage("SpreadSheet closed" + "\n")
compteur = 0
except Exception:
None
try:
object2 = ""
object = v.getObjectInfo(v.getCursorPos()) # here for object preselected
object2 = object["Object"] + "." + object["Component"] # object + component
pnt = FreeCAD.Vector(float(object["x"]),float(object["y"]),float(object["z"]))# vector on position mouse to object
# print "pnt ",pnt
except Exception:
pos = info["Position"] # if mouse in 3D view
pnt = self.view.getPoint(pos) # vector detect on mouse position 3D view
# print "pnt ",pnt
try:
if (info["Button"] == "BUTTON1") and (info["State"] == "DOWN"): # coordinates clic to mouse
positionX1 = round(pnt[0],arrondi)
positionY1 = round(pnt[1],arrondi)
positionZ1 = round(pnt[2],arrondi)
coorBegin = ""
coorBegin = "X1: "+str(positionX1)+" Y1: "+str(positionY1)+" Z1: "+str(positionZ1)
if pas == 0:
pas = 1
else:
pas = 0
try: # spreadSheet
if spreadSheet == 1:
compteur += 1
spread.set("A"+str(compteur) , str(positionX1) + ", " + str(positionY1) + ", " + str(positionZ1))
spread.set("B"+str(compteur) , str(positionX1))
spread.set("C"+str(compteur) , str(positionY1))
spread.set("D"+str(compteur) , str(positionZ1))
App.ActiveDocument.recompute()
FreeCAD.Console.PrintMessage(str(compteur) + " : " + str(positionX1) + ", " + str(positionY1) + ", " + str(positionZ1) + "\n")
except Exception:
None
except Exception:
None
try:
objectAnn.BasePosition = (pnt[0], pnt[1], pnt[2])
if force == 2:
objectAnn.LabelText = ["X: " + str(round(pnt[0],arrondi)) + " Y: " + str(round(pnt[1],arrondi)) + " Z: " + str(round(pnt[2],arrondi))]
else:
if ((pas == 1) or (force == 1)):
coorEnd = longueur = angles = ""
coorEnd = "X2: " + str(round(pnt[0],arrondi)) + " Y2: " + str(round(pnt[1],arrondi)) + " Z2: " + str(round(pnt[2],arrondi))
longueur = "L: " + str(round(dist(FreeCAD.Vector(positionX1,positionY1,positionZ1), FreeCAD.Vector(pnt[0], pnt[1], pnt[2])),12)) # around to 12 decimales
alphaXY = alphaXY = alphaXZ = 0.0
alphaXY = str(round(angle2(positionX1,positionY1,pnt[0],pnt[1],1),arrondi))
alphaYZ = str(round(angle2(positionY1,positionZ1,pnt[1],pnt[2],1),arrondi))
alphaXZ = str(round(angle2(positionX1,positionZ1,pnt[0],pnt[2],1),arrondi))
angles = "XY: " + alphaXY + unichr(176) + " YZ: " + alphaYZ + unichr(176) + " XZ: " + alphaXZ + unichr(176) # unichr(176) = degrees character
if object2 == "":
objectAnn.LabelText = [coorBegin, coorEnd, longueur, angles,]
else:
objectAnn.LabelText = [object2, coorBegin, coorEnd, longueur, angles,]
else:
if object2 == "":
objectAnn.LabelText = ["X: " + str(round(pnt[0],arrondi)) + " Y: " + str(round(pnt[1],arrondi)) + " Z: " + str(round(pnt[2],arrondi)),]
else:
objectAnn.LabelText = [object2, "X: " + str(round(pnt[0],arrondi)) + " Y: " + str(round(pnt[1],arrondi)) + " Z: " + str(round(pnt[2],arrondi))]
except Exception:
FreeCAD.Console.PrintError("End FCInfoToMouse by an error" + "\n")
v.removeEventCallback("SoEvent",c) # close event observation
##### Begin ######
FreeCAD.Console.PrintMessage("__Welcome to FCInfoToMouse__" + "\n")
FreeCAD.Console.PrintMessage("SHIFT + Q : for quit" + "\n")
FreeCAD.Console.PrintMessage("SHIFT + M : for force display, mode single, mode normal" + "\n")
FreeCAD.Console.PrintMessage("SHIFT + C : for concealed / visible" + "\n")
FreeCAD.Console.PrintMessage("SHIFT + D : for create spreadSheet / close spreadSheet" + "\n")
FreeCAD.Console.PrintMessage("____________________________" + "\n")
pas = 0
o = ViewObserver(v)
try:
c = v.addEventCallback("SoEvent",o.logPosition)
except Exception:
App.ActiveDocument.removeObject(objectAnn.Label)
FreeCAD.Console.PrintMessage( "Not GUI End FCInfoToMouse" + "\n")
oder zu Gists Macro_FCInfoToMouse.FCMacro oder die Zip-Datei Macro_FCInfoToMouse.FCMacro.zip
Einschränkungen
Es ist möglich, dass das Makro einige Tasten nicht erkennt.
Verweise
Diskussion im FreeCAD-Forum: From autocad to freecad
Meine Makros auf gist mario52a
Version
27/03/2018 ver 00.04 : add function "Save the coordinate in a spreadSheet key "D" flip/flop on,off
24/01/2016 ver 00.03 : add section configuration and replace key "C" to "M"
23/01/2016 ver 00.02 : add function "single", replace key "H" to "C" and correct bug
02/01/2016 : ver 0.1