FEM ElementFluid1D/pt-br

Descrição

Creates a FEM fluid section element for pneumatic and hydraulic networks solved with CalculiX.

Utilização

1. There are several ways to invoke the command:
   • Press the Fluid section for 1D flow button.
   • Select the Model → Element Geometry → Fluid section for 1D flow option from the menu.
2. Select Fluid type: Liquid, Gas or Open Channel
3. Select Section type: Pipe Manning, Pipe Inlet etc.
4. Enter Section type parameters.
5. Select and add an edge.

Limitações

1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notas

1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
2. The *FLUID SECTION card is used to model fluid elements for 1D flow.