CAM Pocket Shape/ru

Расположение в меню
Path Pocket
Path → Pocket Shape
Верстаки
Path
Быстрые клавиши
P O
Представлено в версии
-
См. также
Нет

Описание

The CAM Pocket Shape command creates a pocketing operation from selected bottom faces, or walls, of one or more pockets of the jobs base object.

The CAM Pocket Shape object is made to be part of a CAM Job.

Применение

Select the bottom or the wall(s) of a pocket. While it is usually easier to select the bottom, the walls have to be selected when a pocket goes through all.
introduced in 1.2: Horizontal edges can also be selected. Edges are combined into wires, and a closed horizontal wire is converted into a pocket face.
There are several ways to invoke the command:
- Press the Pocket Shape button.
- Select the CAM → Pocket Shape option from the menu.
Adjust the desired properties.

Свойства

Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.

Base

Note: It is suggested that you do not edit the ДанныеPlacement property of path operations. Rather, move or rotate the CAM Job model as needed.

ДанныеPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
- ДанныеAngle: Angle in degrees applied to rotation of the object around Axis property value
- ДанныеAxis: Axis (one or multiple) around which to rotate the object, set in sub-properties: X, Y, Z
  - ДанныеX: X-axis value
  - ДанныеY: Y-axis value
  - ДанныеZ: Z-axis value
- ДанныеPosition: Position of the object, set in sub-properties: X, Y, Z - with respect to the origin (or origin of parent object container)
  - ДанныеX: X-distance value
  - ДанныеY: Y-distance value
  - ДанныеZ: Z-distance value
ДанныеLabel: User-provided name of the object (UTF-8)

Depth

ДанныеClearance Height: The height needed to clear clamps and obstructions
ДанныеFinal Depth: Final Depth of Tool- lowest value in Z
ДанныеFinish Depth: Maximum material removed on final pass. The height (thickness) of the last cutting level - set for a better finish.
ДанныеSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
ДанныеStart Depth: Starting depth of Tool - first cut depth in Z
ДанныеStep Down: Incremental step down of Tool during operation

Visual reference for Depth properties (settings)

Extension

ДанныеExtension Corners: When enabled connected extension edges are combined to wires.
ДанныеExtension Length Default: Default length of extensions.

Face

ДанныеOffset Pattern: Clearing pattern to use. (Select in which manner the horizontal movements should be done.)

Path

ДанныеActive: Make False, to prevent operation from generating code
ДанныеComment: An optional comment for this Operation
ДанныеUser Label: User assigned label
ДанныеTool Controller: Defines the Tool controller used in the Operation

Pocket

ДанныеCut Mode: Specifies a CW or CCW move for the cut
ДанныеExtra Offset: Extra offset to apply to the operation. Direction is operation dependent. (Extra value to stay away from final profile good for roughing toolpath)
ДанныеMin Travel: Use 3D Sorting of Path (when multiple base geometries used).
ДанныеRetract Threshold: Distance below which the operation can stay down for repositioning moves. A value of 0 disables this behavior. introduced in 1.2: This replaces ДанныеKeep Tool Down.
ДанныеStart At: Start pocketing at center or boundary.
ДанныеStep Over: Select the horizontal step over (Percent of tool diameter: 100% = tool diameter).
ДанныеUse Outline: Uses the outline of the base geometry.
ДанныеAngle: Angle of the clearing pattern relative to the X-axis. This property was formerly named ДанныеZig Zag Angle. It is hidden when ДанныеOffset Pattern is set to Offset.
ДанныеSortingMode: Controls how multiple selected base geometries are ordered. Automatic uses automatic sorting. Manual follows the selection order.

Rotation

ДанныеAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
~~ДанныеB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).~~
ДанныеEnable Rotation: Enable rotation to gain access to pockets or areas not normal to Z axis.
ДанныеInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
ДанныеReverse Direction: Reverse orientation of Operation by 180 degrees.

Start Point

ДанныеStart Point: The start point of this path.
ДанныеUse Start Point: Make True, if manually specifying a Start Point, then enter Start Points in the property data Start Points field.

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above.

This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

Add: Adds selected element(s) which should be the base(s) for the path(s)
Delete: Delete the selected item(s) in the Base Geometry list
Clear: Clear all items in the Base Geometry list

Extensions

ДанныеShow All: If selected, all potential extensions are visualized. Enabled extensions in purple, disabled extensions in yellow.
ДанныеExtension Corners
ДанныеExtension Length Default
Enable
Disable
Clear

Depths

ДанныеStart Depth
ДанныеFinal Depth
ДанныеStep Down

Heights

ДанныеSafe Height
ДанныеClearance Height

Operation

ДанныеTool Controller
ДанныеCut Mode
ДанныеPattern (Offset Pattern)
ДанныеAngle
ДанныеStep Over Percent (Step Over)
ДанныеPass Extension: The distance the facing operation will extend beyond the boundary shape (base geometry)