Part Fuse/sv

Beskrivning

This command is an automated form of the Boolean operation.

Usage

1. Select two or more shapes
2. There are several ways to invoke the command:
   • Press the Fuse button.
   • Select the Part → Boolean → Fuse option from the menu.

Supported inputs

Input objects must be OpenCASCADE shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean commands in MeshDesign workbench.

• Solid + Solid: the result is a solid that occupies all the volume covered by the inputs

• Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.

• Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from a fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. To drag items out of a fusion you have to drop them onto the document node (the filename) of your model. A manual recompute (press F5 key or click on the Refresh/Recompute icon) is required to see the results.