Part CrossSections/ro

Utilitarul Cross-sections crează una sau mai multe secțiuni transversale prin forma selectată.

1. Select a shape.
2. Press the Cross-sections button.
3. Define the guiding plane.
4. Define the position (height of the cross-section).
5. Optionally, check Sections to create more than one cross-section:
   • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
   • Set the count.
6. Press OK.

• The resulting object is not parametric, that is it is not linked to the original shape.
• A single object is created, even with more than one cross-section.