TechDraw Balloon/ru

Связать размер с 3D геометрией

Вставить размер знака

Верстак "TechDraw"

Описание

The TechDraw Balloon tool can add balloons with leader line in a drawing.

Применение

1. Select one of the following:
   • A View (on the page or in the Tree view).
   • A vertex in a View.
   • An edge in a View.
   • A closed region in a View.
2. There are several ways to invoke the tool:
   • Press the Insert Balloon Annotation button.
   • Select the TechDraw → Annotations → Insert Balloon Annotation option from the menu.
3. If a View or a region was selected:
   1. The cursor changes to a balloon icon.
   2. Click a point on the page for the origin of the Balloon.

To move the bubble of a Balloon, press and hold the left mouse button on its center and drag the mouse.

To change the properties of a Balloon double-click it on the page or in the Tree view. This will open the Balloon task panel.

Note: The position of a Balloon is relative to its Source View and uses the same scale factor.

Using separators

When using a rectangle shape, separators can be added using "|" in the text. For example "AAA|TEST|111" gives:

Свойства

Data

• ДанныеText: Text to be displayed.
• ДанныеSource View: Source View for the balloon.
• ДанныеOrigin X: Balloon origin x-position relative to the View.
• ДанныеOrigin Y: Balloon origin y-position relative to the View.
• ДанныеEnd Type: End symbol for the balloon line. Options: Filled Arrow, Open Arrow, Tick, Dot, Open Circle, Fork, Filled Triangle, None.
• ДанныеEnd Type Scale: Scale factor for the End Type.
• ДанныеBubble Shape: Shape of the balloon bubble. Options: Circular, None, Triangle, Inspection, Hexagon, Square, Rectangle.
• ДанныеShape Scale: Scale factor for the Shape.
• ДанныеText Wrap: Text wrap length; -1 means the text will never be wrapped and the result is in every case a single line.
• ДанныеKink Length: Distance from the Shape to the leader line kink.
• ДанныеX: Horizontal position of the balloon bubble relative to the View.
• ДанныеY: Vertical position of the balloon bubble relative to the View.

View

• ВидColor: Color of the balloon text.
• ВидFont: The name of the font to use for the balloon bubble.
• ВидFontsize: Dimension text size in mm.
• ВидLine Visible: Whether the balloon line is visible.
• ВидLine Width: Balloon line width

Программирование

См. так же: TechDraw API и Основы составления скриптов FreeCAD.

The Balloon tool can be used in macros and from the Python console by using the following functions:

bal1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewBalloon','Balloon')
rc = page.addView(bal1)

Связать размер с 3D геометрией

Вставить размер знака

Верстак "TechDraw"

TechDraw

• Pages: Insert Default Page, Insert Page using Template, Update template fields, Redraw Page, Print All Pages, Export Page as SVG, Export Page as DXF
• Views:
  • TechDraw views: Insert View, Insert Broken View, Insert Section View, Insert Complex Section View, Insert Detail View, Insert Projection Group, Insert Clip Group, Insert SVG Symbol, Insert Bitmap Image, Share View, Turn View Frames On/Off, Project Shape
  • Views from other workbenches: Insert Active View, Insert Draft Workbench Object, Insert BIM Workbench Object, Insert Spreadsheet View
• Stacking: Move view to top of stack, Move view to bottom of stack, Move view up one level, Move view down one level

---

• Dimensions: Insert Dimension, Insert Length Dimension, Insert Horizontal Dimension, Insert Vertical Dimension, Insert Radius Dimension, Insert Diameter Dimension, Insert Angle Dimension, Insert 3-Point Angle Dimension, Insert Area Annotation, Create Arc Length Dimension, Insert Horizontal Extent Dimension, Insert Vertical Extent Dimension, Create Horizontal Chain Dimensions, Create Vertical Chain Dimensions, Create Oblique Chain Dimensions, Create Horizontal Coordinate Dimensions, Create Vertical Coordinate Dimensions, Create Oblique Coordinate Dimensions, Create Horizontal Chamfer Dimension, Create Vertical Chamfer Dimension, Insert Balloon Annotation, Insert Axonometric Length Dimension, Insert Landmark Dimension, Dimension Repair, Link Dimension to 3D Geometry

---

• Hatching: Hatch Face using Image File, Apply Geometric Hatch to Face,
• Annotations: Insert Annotation, Add Leaderline to View, Insert Rich Text Annotation, Add Cosmetic Vertex, Add Midpoint Vertices, Add Quadrant Vertices, Add Centerline to Faces, Add Centerline between 2 Lines, Add Centerline between 2 Points, Add Cosmetic Line Through 2 points, Add Cosmetic Circle, Change Appearance of Lines, Show/Hide Invisible Edges, Add Welding Information to Leader, Add Surface Finish Symbol, Add Hole or Shaft Tolerances

---

• Extensions:
  • Attributes and modifications: Select Line Attributes, Cascade Spacing and Delta Distance, Change Line Attributes, Extend Line, Shorten Line, Lock/Unlock View, Position Section View, Position Horizontal Chain Dimensions, Position Vertical Chain Dimensions, Position Oblique Chain Dimensions, Cascade Horizontal Dimensions, Cascade Vertical Dimensions, Cascade Oblique Dimensions, Calculate the area of selected faces, Calculate the arc length of selected edges, Customize format label
  • Centerlines and threading: Add Circle Centerlines, Add Bolt Circle Centerlines, Add Cosmetic Thread Hole Side View, Add Cosmetic Thread Hole Bottom View, Add Cosmetic Thread Bolt Side View, Add Cosmetic Thread Bolt Bottom View, Add Cosmetic Intersection Vertex(es), Add an offset vertex, Add Cosmetic Circle, Add Cosmetic Arc, Add Cosmetic Circle 3 Points, Add Cosmetic Parallel Line, Add Cosmetic Perpendicular Line
  • Dimensions: Insert '⌀' Prefix, Insert '□' Prefix, Insert 'n×' Prefix, Remove Prefix, Increase Decimal Places, Decrease Decimal Places

---

• Miscellaneous: Remove Cosmetic Object

---

• Additional: Line Groups, Templates, Hatching, Geometric dimensioning and tolerancing, Preferences

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков