Part Box/cs

Other languages:
Cylinder
Part

Part Box

Umístění Menu
Part → Box
Pracovní stoly
Part, Complete
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Part CreatePrimitives

Description

The Part Box command creates a parametric box solid, a rectangular cuboid. In the coordinate system defined by its ÚdajePlacement property, the bottom face of the box lies on the XY-plane with its front left corner at the origin, and its front edge parallel to the X-axis.

Usage

V datové záložce boxu mohou být později upravovány vlastnosti objektu:

Example

Part Box from the scripting example

A Part Box object created with the scripting example below is shown here.

Notes

  • A Part Box can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.

Properties

See also: Property View.

A Part Box object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Box

  • ÚdajeLength (Length): The length of the box. This is the dimension in its X-direction. The default is 10mm.
  • ÚdajeWidth (Length): The width of the box. This is the dimension in its Y-direction. The default is 10mm.
  • ÚdajeHeight (Length): The height of the box. This is dimension in its Z-direction. The default is 10mm.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Box can be created with the addObject() method of the document: 

box = FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
  • Where "myBox" is the name for the object.
  • The function returns the newly created object.

Example: 

import FreeCAD as App

doc = App.activeDocument()

box = doc.addObject("Part::Box", "myBox")
box.Length = 4
box.Width = 8
box.Height = 12
box.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))

doc.recompute()


Cylinder
Part
Part
User documentation