PartDesign Chamfer/ko

PartDesign Chamfer
Menu location
Part Design → Apply a dress-up feature → Chamfer
Workbenches
부품설계 작업대
Default shortcut
None
Introduced in version
-
See also
모깎기

설명

부품설계 작업대에서 모따기 도구는 개체에서 선택한 모서리를 평평하게 따냅니다.

용법

모따기 추가

1. Optionally activate the Body to chamfer.
2. There are several ways to select edges to chamfer:
   • Select one or more edges of the Body individually.
   • Select one or more faces of the Body to select all their edges.
   • Select a feature (usually the last feature) of the Body to select all its edges.
3. For a chain of tangentially connected edges only a single edge needs to be selected, the chamfer will propagate along the chain.
4. There are several ways to invoke the tool:
   • Press the Chamfer button.
   • Select the Part Design → Apply a dress-up feature → Chamfer option from the menu.
5. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
6. The Chamfer parameters task panel opens. See Options for more information.
7. Press the OK button to finish.

모따기 편집

1. Do one of the following:
   • Double-click the Chamfer object in the Tree view
   • Right-click the Chamfer object in the Tree view and select Edit Chamfer from the context menu.
2. The Chamfer parameters task panel opens. See Options for more information.
3. Press the OK button to finish.

선택 사항

• To add edges do one of the following:
  • Press the Add button to start selecting edges and/or faces in the 3D view.
  • To select all remaining edges do the following:
    1. If required press the Add button.
    2. Use the Ctrl+Shift+A keyboard shortcut, or right-click the list and select Add all edges from the context menu.
• To remove edges do one of the following:
  • Press the Remove button to start deselecting edges and/or faces in the 3D view. Selected elements are highlighted in purple.
  • Select one or more elements in the list and press the Del key, or right-click the list and select Remove from the context menu.
• Specify a chamfer Type:
  • Equal distance: One distance is used to place both chamfer edges.
  • Two distances: Two distances are used to place the chamfer edges.
  • Distance and angle: A distance is used to place one chamfer edge, the placement of the other chamfer edge is defined by the angle of the chamfer.
• Press the Flip direction button to flip the direction of the chamfer (deactivated for Equal distance).
• Set the Size of the chamfer.
• Set the Size2 of the chamfer (only available if Two distances is selected).
• Set the Angle of the chamfer (only available if Distance and angle is selected).
• Check the Use all edges checkbox to select all edges of the previous feature. This deactivates the selection list and the related buttons.

보충 설명

• 부품설계 작업대에서의 모따기를 부품 작업대에서의 모따기와 혼동하지 마세요. 둘의 차이를 알지 못하는 경우 부품 작업대의 모따기를 부품설계의 몸통에 사용하면 안 됩니다.
• 모따기는 인접한 면을 완전히 소모할 수 없습니다.

속성

속성 편집기도 참조하세요.

A PartDesign Chamfer object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Base

• 데이터Base (LinkSub): Link to the selected edges and faces of the parent feature. Can be a link to only the parent feature if 데이터Use All Edges is true.
• 데이터Support Transform (Bool): If true the chamfered shape of the additive/subtractive parent feature will be used when the chamfer object is included in a pattern, else only the shape of the chamfer itself will be used. The default is false.
• 데이터 (hidden)Add Sub Shape (PartShape)
• 데이터 (hidden)Base Feature (Link): Link to the parent feature.
• 데이터 (hidden)_ Body (LinkHidden): Link to the parent body.

Chamfer

• 데이터Chamfer Type (Enumeration): The chamfer type: Equal distance (default), Two distances or Distance and Angle.
• 데이터Size (QuantityConstraint): The first chamfer distance. The default is 1 mm.
• 데이터Size2 (QuantityConstraint): The second chamfer distance. Only used if 데이터Chamfer Type is Two distances. The default is 1 mm.
• 데이터Angle (Angle): The chamfer angle. Only used if 데이터Chamfer Type is Distance and Angle. The default is 45 °.
• 데이터Flip Direction (Bool): If true the direction of the chamfer is flipped. Not used if 데이터Chamfer Type is Equal distance. The default is false.
• 데이터Use All Edges (Bool): If true all edges of the feature are chamfered, and the edges specified by 데이터Base are ignored. The default is false.

Part Design

• 데이터Refine (Bool): If true redundant edges are removed from the result of the operation. The default value is determined by the Automatically refine model after sketch-based operation preference. See PartDesign Preferences.

알려진 문제

See PartDesign Fillet.