PartDesign Fillet/ko

Other languages:
부울 연산
모따기
부품설계 작업대

PartDesign Fillet

Menu location
Part Design → Apply a dress-up feature → Fillet
Workbenches
부품설계 작업대
Default shortcut
None
Introduced in version
-
See also
부품설계 작업대에서 모따기

설명

부품설계 작업대에서 모깎기 도구는 개체의 선택된 모서리를 둥글게 깎아냅니다. 트리 뷰에 해당 표현이 있는 문서에 모깎기 개체를 추가합니다.

용법

모깎기 추가

  1. Optionally activate the Body to fillet.
  2. There are several ways to select edges to fillet:
    • Select one or more edges of the Body individually.
    • Select one or more faces of the Body to select all their edges.
    • Select a feature (usually the last feature) of the Body to select all its edges.
  3. For a chain of tangentially connected edges only a single edge needs to be selected, the fillet will propagate along the chain.
  4. There are several ways to invoke the tool:
    • Press the Fillet button.
    • Select the Part Design → Apply a dress-up feature → Fillet option from the menu.
  5. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
  6. The Fillet parameters task panel opens. See Options for more information.
  7. Press the OK button to finish.

모깎기 편집

  1. Do one of the following:
    • Double-click the Fillet object in the Tree view
    • Right-click the Fillet object in the Tree view and select Edit Fillet from the context menu.
  2. The Fillet parameters task panel opens.See Options for more information.
  3. Press the OK button to finish.

선택 사항

보충 설명

속성

속성 편집기도 참조하세요.

A PartDesign Fillet object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Base

Fillet

Part Design

알려진 문제

고체 몸통에서 작동하는 모깎기, 모따기 및 기타 도형특징은 FreeCAD가 사용하는 기본 OpenCASCADE 기술(OCCT) 커널에 따라 달라집니다. OCCT 커널은 두 면이 만나는 동시에 동시에 날카로운 모서리를 처리하는 데 어려움을 겪는 경우가 있습니다. 이 경우 FreeCAD는 설명 없이 충돌할 수 있습니다.

터미널에서 실행하면 FreeCAD는 충돌 후 다음과 같은 로그를 출력할 수 있습니다. 

#1  0x7fff63d660ba in BRep_Tool::Curve(TopoDS_Edge const&, TopLoc_Location&, double&, double&) from /usr/lib/x86_64-linux-gnu/libTKBRep.so.7+0x2a
#2  0x7fff63d69546 in BRep_Tool::Curve(TopoDS_Edge const&, double&, double&) from /usr/lib/x86_64-linux-gnu/libTKBRep.so.7+0x46
#3  0x7fff71f4fef5 in ChFi3d_Builder::PerformIntersectionAtEnd(int) from /usr/lib/x86_64-linux-gnu/libTKFillet.so.7+0x3b05
#4  0x7fff71f58307 in ChFi3d_Builder::PerformOneCorner(int, bool) from /usr/lib/x86_64-linux-gnu/libTKFillet.so.7+0x1097
#5  0x7fff71ef6218 in ChFi3d_Builder::PerformFilletOnVertex(int) from /usr/lib/x86_64-linux-gnu/libTKFillet.so.7+0x4e8
#6  0x7fff71ef71d1 in ChFi3d_Builder::Compute() from /usr/lib/x86_64-linux-gnu/libTKFillet.so.7+0xe31
#7  0x7fff720ad7c3 in BRepFilletAPI_MakeChamfer::Build() from /usr/lib/x86_64-linux-gnu/libTKFillet.so.7+0x33
#8  0x7fff723be48e in PartDesign::Chamfer::execute() from /usr/lib/freecad-daily/lib/_PartDesign.so+0x60e
...

This output references functions from OCCT libraries. If this type of crash occurs, the problem may need to be reported and solved in OCCT rather than in FreeCAD.

이 출력은 OCCT 라이브러리의 기능을 참조합니다. 이러한 유형의 충돌이 발생하면 FreeCAD가 아닌 OCCT에서 문제를 보고하고 해결해야 할 수도 있습니다.

위상 명명(Topological naming)

Edge numbers are not completely stable, therefore it is advisable that you finish the main design work of your solid body before applying features like fillets and chamfers, otherwise edges could change names and filleted edges would likely become invalid. When the 데이터Use All Edges property is true there is some protection from this. Because in such cases all the edges of the base object are used and there is no dependence on individual edge names.

위상 명명 문제에 대해 더 자세히 알아보세요.


부울 연산
모따기
부품설계 작업대
PartDesign
User documentation