Sketcher ConstrainSymmetric/es
|
|
| Ubicación en el Menú |
|---|
| Croquis → Restricciones del Croquizador → Restricción de Simetría |
| Entornos de trabajo |
| Croquizador |
| Atajo de teclado por defecto |
| S |
| Introducido en versión |
| - |
| Ver también |
| Restricción Paralela |
Descripción
Descripción
La Restricción de Simetría restringe dos puntos seleccionados a ser simétricos con respecto a un eje dado. Los dos puntos seleccionados se restringen para situarse sobre la perpendicular al eje de simetría y situados a la misma distancia de este.
Funcionamiento
Selecciona dos puntos y una línea en el croquis. Los puntos y la línea seleccionados se volverán de color verde oscuro.
Pulsa sobre el icono 
en la barra de herramientas del Croquizador o selecciona la Restricción de Simetría en el submenú de Restricciones del entorno del Croquizador (o del entorno de Diseño de Piezas).
Esto aplicará la restricción a los elementos seleccionados.
Esta es una restricción geométrica y no tiene parámetros editables.
See also: Drawing aids.
Continue mode
- Make sure there is no selection.
- There are several ways to invoke the tool:
- Press the
Constrain symmetric button. - Select the Sketch → Sketcher constraints → Constrain symmetric option from the menu.
- introduced in version 1.0: Right-click in the 3D view and select the Constrain → Constrain symmetric option from the context menu.
- Use the keyboard shortcut: S.
- Press the
- The cursor changes to a cross with the tool icon.
- Do one of the following:
- Select two points and a symmetry point (in that order).
- Select two points and a symmetry line (idem).
- Select a point, a symmetry line and another point (idem).
- Select a line and a symmetry point (idem).
- A constraint is added.
- Optionally keep creating constraints.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Run-once mode
- Do one of the following:
- Select two points and a symmetry point (in that order).
- Select two points and a symmetry line (in any order).
- Select a line and a symmetry point (idem).
- Invoke the tool as explained above, or with the following additional option:
- introduced in version 1.0: Right-click in the 3D view and select the Constrain symmetric option from the context menu.
- introduced in version 1.0: Right-click in the 3D view and select the
- A constraint is added.
Notes
- The arrows of this constraint show the color of the dimensional constraints.
Scripting
Two points and a symmetry line:
Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line1, PointOfLine1, Line2, PointOfLine2, SymmetryLine))
Two points and a symmetry point:
Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line1, PointOfLine1, Line2, PointOfLine2, LineS, PointOfLineS))
A line and a symmetry point (In the GUI one can select a line and a point, but it uses internally the same form as above, with the two extremities of the same line):
Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line, 1, Line, 2, LineS, PointOfLineS))
The Sketcher scripting page explains the values which can be used for Line1, Line2, LineS, Line, PointOfLine1, PointOfLine2 and PointOfLineS, and contains further examples on how to create constraints from Python scripts.
Sketcher
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub