TechDraw FaceCenterLine/ko
|
기술도면 면중심선 |
| Menu location |
|---|
| 기술도면→ 선 추가 → 면에 중심선 추가 |
| Workbenches |
| 기술도면 작업대 |
| Default shortcut |
| None |
| Introduced in version |
| 0.19 |
| See also |
| 기술도면 2선간 중심선, 기술도면 2점간 중심선 |
설명
기술도면 면중심선 도구는 선택한 면에 중심선을 추가합니다.
면에 추가된 중심선
생성 방법
- 보기(View)에서 하나 이상의 면을 선택합니다.
- 도구를 호출하는 방법은 여러 가지가 있습니다.
면에 중심선 추가 버튼을 누르세요.- 메뉴에서 기술도면→ 선 추가 → 면에 중심선 추가 를 선택하세요.
- 작업판이 열립니다. 자세한 내용은 #선택 사항을 참조하세요.
- 확인 버튼을 눌러 확인합니다.
- 선택한 면의 경계 상자 중간 지점에 중심선이 추가됩니다.
편집 방법
모든 중심선 도구( 기술도면 면중심선, 
기술도면 2선간 중심선 그리고 
기술도면 2점간 중심선)를 사용하여 중심선을 편집할 수 있습니다.
- 중심선을 선택하세요.
- 중심선 도구를 호출합니다.
- 작업판이 열립니다. 자세한 내용은 #선택 사항을 참조하세요.
- 확인 버튼을 눌러 확인합니다.
선택 사항
- Orientation:
- Vertical: Forces the centerline vertical. Ignored for 2PointCenterLines.
- Horizontal: Forces the centerline horizontal. Ignored for 2PointCenterLines.
- Aligned: Not available for FaceCenterLines. Forces the centerline to follow the general direction of the selected edges for 2LineCenterLines. Ignored for 2PointCenterLines.
- Shift Horizontal: Moves the centerline left or right of its normal position.
- Shift Vertical: Moves the centerline up or down from its normal position.
- Rotate: Rotates the centerline around its midpoint (degrees. + counterclockwise, - clockwise).
- Extend By: Makes the centerline longer by this amount.
- Color: The color of the centerline.
- Weight: The width of the centerline.
- Style: The linestyle of the centerline. The options are:
Continuous
Dash
Dot
DashDot
DashDotDot
Notes
- To delete a centerline select it and press Delete. introduced in 1.0
- FaceCenterLines will eventually replace two View properties:
- 보기HorizCenterLine: Show a horizontal centerline through view.
- 보기VertCenterLine: Show a vertical centerline through view.
Properties
Centerlines have no properties of their own, as they are not document objects.
TechDraw
- Pages: Insert Default Page, Insert Page using Template, Update template fields, Redraw Page, Print All Pages, Export Page as SVG, Export Page as DXF
- Views:
- TechDraw views: Insert View, Insert Broken View, Insert Section View, Insert Complex Section View, Insert Detail View, Insert Projection Group, Insert Clip Group, Insert SVG Symbol, Insert Bitmap Image, Share View, Turn View Frames On/Off, Project Shape
- Views from other workbenches: Insert Active View, Insert Draft Workbench Object, Insert BIM Workbench Object, Insert Spreadsheet View
- Stacking: Move view to top of stack, Move view to bottom of stack, Move view up one level, Move view down one level
- Dimensions: Insert Dimension, Insert Length Dimension, Insert Horizontal Dimension, Insert Vertical Dimension, Insert Radius Dimension, Insert Diameter Dimension, Insert Angle Dimension, Insert 3-Point Angle Dimension, Insert Area Annotation, Create Arc Length Dimension, Insert Horizontal Extent Dimension, Insert Vertical Extent Dimension, Create Horizontal Chain Dimensions, Create Vertical Chain Dimensions, Create Oblique Chain Dimensions, Create Horizontal Coordinate Dimensions, Create Vertical Coordinate Dimensions, Create Oblique Coordinate Dimensions, Create Horizontal Chamfer Dimension, Create Vertical Chamfer Dimension, Insert Balloon Annotation, Insert Axonometric Length Dimension, Insert Landmark Dimension, Dimension Repair, Link Dimension to 3D Geometry
- Hatching: Hatch Face using Image File, Apply Geometric Hatch to Face,
- Annotations: Insert Annotation, Add Leaderline to View, Insert Rich Text Annotation, Add Cosmetic Vertex, Add Midpoint Vertices, Add Quadrant Vertices, Add Centerline to Faces, Add Centerline between 2 Lines, Add Centerline between 2 Points, Add Cosmetic Line Through 2 points, Add Cosmetic Circle, Change Appearance of Lines, Show/Hide Invisible Edges, Add Welding Information to Leader, Add Surface Finish Symbol, Add Hole or Shaft Tolerances
- Extensions:
- Attributes and modifications: Select Line Attributes, Cascade Spacing and Delta Distance, Change Line Attributes, Extend Line, Shorten Line, Lock/Unlock View, Position Section View, Position Horizontal Chain Dimensions, Position Vertical Chain Dimensions, Position Oblique Chain Dimensions, Cascade Horizontal Dimensions, Cascade Vertical Dimensions, Cascade Oblique Dimensions, Calculate the area of selected faces, Calculate the arc length of selected edges, Customize format label
- Centerlines and threading: Add Circle Centerlines, Add Bolt Circle Centerlines, Add Cosmetic Thread Hole Side View, Add Cosmetic Thread Hole Bottom View, Add Cosmetic Thread Bolt Side View, Add Cosmetic Thread Bolt Bottom View, Add Cosmetic Intersection Vertex(es), Add an offset vertex, Add Cosmetic Circle, Add Cosmetic Arc, Add Cosmetic Circle 3 Points, Add Cosmetic Parallel Line, Add Cosmetic Perpendicular Line
- Dimensions: Insert '⌀' Prefix, Insert '□' Prefix, Insert 'n×' Prefix, Remove Prefix, Increase Decimal Places, Decrease Decimal Places
- Miscellaneous: Remove Cosmetic Object
- Additional: Line Groups, Templates, Hatching, Geometric dimensioning and tolerancing, Preferences
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub