Sketcher Intersection/ja

Description

The Sketcher Intersection tool (introduced in 1.1) intersects faces and/or edges belonging to objects outside the sketch with the sketch plane. The intersected geometry is called "external geometry". It stays parametrically linked to its source objects. External geometry is marked with a dedicated color (default magenta). It can be defining geometry that is visible outside the sketch or construction geometry that is not visible outside the sketch.

Usage

1. There are several ways to invoke the tool:
   • Press the Create external intersection geometry button.
   • Select the Sketcher → Sketcher tools → Create external intersection geometry option from the menu.
   • Right-click in the 3D view and select the Create external intersection geometry option from the context menu.
   • Use the keyboard shortcut: G then I.
2. The cursor changes to a cross with the tool icon.
3. Select one or more external faces and/or edges. See Notes.
4. External geometry is created.
5. This tool always runs in continue mode: optionally keep selecting external faces and/or edges.
6. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Notes

• A face results in one or more edges, an edge in one or more points. Geometry not touching the sketch plane is ignored.
• External geometry is created as defining geometry or construction geometry according to the status of the Toggle construction geometry tool. This tool can also be used to toggle the mode of individual edges. Check the Edit → Preferences... → Sketcher → General → Always add external geometry as reference option to ignore the status of this tool and always add external geometry as construction geometry.